Applications available in El Salvador

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Flow & Energy Management Solutions for Pulp & Paper Industry

    Many organizations in the Pulp & Paper industry use these flowmeters to improve all processes and maximize plant performance; integrate flow information for better decision making at management level and to optimize maintenance.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Instruments and analyzers for measure spectral irradiance of sun simulator

    Sun simulators are available in different classes indicating the performance characteristics by the combination of three letters (A,B or C) (according to IEC 60904, JIS 8912 and ASTM E 927-05). Each letter represents respectively the spectral match with the solar spectrum (1000 W/m2, AM 1.5), uniformity of the light field and temporary stability. Class AAA are considered as most accurate and have an ideal spectral match between 0.75 and 1.25, max. 2.0% non-uniformity and 0.5% nonstability according to the IEC...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for stability monitoring of sun simulators

    Monitoring the stability of a sun simulator enables the researcher to improve the stability of the PV cell and precision of the I-V measurement. The sun simulator is for example used to test the produced PV solar panel and classify it according to the STC standardization.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Flow & Energy Management Solutions for food and beverage industry

    For food and beverage processing plants, engaging in blending and batching of foods and drinks where issues of hygiene and contamination are of major concern. Also good for measuring the raw materials used for production.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Anaerobic water purification systems for biogas desulphurisation

    Biogas is increasingly important as source of sustainable energy. When biogas is produced through any form of anaerobic digestion, it will be mostly polluted with hydrogen sulphide. The concentrations can vary from 200 ppm up to several volume %.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Very large waste gas volumes with low contaminant concentration

    Example: Electronics industry. Similar tasks: Paint shops, spectacle coating, coating on the inside of cans.

  • Premium

    Several waste gas streams: Highly contaminated oxygen-free waste gas, and medium waste gas stream

    Example: Chemical industry. Similar tasks: Petrochemical and pharmaceutical industries.

  • Premium

    Corrosion-resistant materials for the power industry

    Sauereisen is the most widely known international company to supply corrosion-resistant coatings, mortars and gunitable refractory linings for flue gas applications in the power industry. For more than half a century, our cost-effective corrosion-resistant materials have provided solutions for power plants and their various components where the infrastructure would otherwise be threatened by corrosion. Our diverse product line includes potassium silicate, novolac epoxy, vinyl ester and urethane formulations...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Waste handling solutions for the fuel from biomass industry

    Renewable energy from biomass: Solid biomass is intended to make a major contribution to the transition from fossil fuels to renewable energies. However, to reach the ambitious goals for heating and energy generation from woody biomass, it will need to be made available in large amounts. In keeping with our slogan, "Technology for a better environment", we have taken up the challenge of finding ways to do this.

    By Komptech Americas LLC based in Denver, COLORADO (USA).

  • Premium

    Centrifuges for edible fats, oils & biofuels

    Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for biofuels

    Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    Instruments and analyzers for PV site solar monitoring

    PV performance measurements under real outdoor conditions are done in may different ways. However, the concept of all performance investigations is to relate the input energy, which is the solar radiative flux, to the output energy, which is the electrical power produced by the PV module. EKO’s Solar Monitoring Stations, referred to as SMS, is the dedicated facility for this type of evaluation.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for measurement of engergy losses in building

    The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location) and building construction (Material). On site measurements are possible with EKO thin film heat flow sensors which can be integrated with building walls. Evaluation of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Several waste gas streams: Short, high concentration peaks and a constant medium concentration

    Example: Production of synthetic resin. Similar tasks: Chemical industry, batch processes in the pharmaceutical and plastics industry.

  • Premium

    Flow measurement in turbine intake for power plants

    Application: Rectangular channel 7.8 x 2.0 m (w x h). Part filled. Concrete walls due to bridge. Natural bed.

    By NIVUS GmbH based in Eppingen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you