Applications available in El Salvador

  • Material handling equipment for biomass energy industry

    You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Wind Farm Noise Assessment by XL2

    One of the largest acoustic consulting firms in Australia was engaged by the New South Wales Department of Planning & Industry to conduct wind farm noise assessments. The goal was to perform a specialist, independent acoustic compliance audit of three major wind farms located near Canberra, Australia’s capital city. The objective of the study was to conduct a detailed noise assessment at residential dwellings near to the wind farms. Three wind farms near Canberra, Australia, were investigated. XL2 Sound Level Meters were operated on a continuous basis, typically over a six week period at each wind farm. The XL2 was battery powered to enable continuous noise logging for two weeks at a time at each residential site. The recorded data was then processed in accordance with the relevant standards specified in the conditions of consent for wind farms.

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Biogas for Cooking

    This solution comprises a Biogas Digester of desired capacity working with specific substrate as input. It may or may not have H2S scrubbing system, depending on the quantity of H2S in the biogas and the requirement by the customer for cleaning it. As the heating value of biogas is almost half that of cooking LPG, specially designed biogas burners are provided to improve cooking speed. Depending on the demand by the customer, a blower to increase gas pressure may be employed.

    By Kirloskar Integrated Technologies Limited based in Kothrud, INDIA.

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust enough for harsh and cold climates. Ammonit offers standard heating systems as well as individual heating solutions, which combine several power sources suitable for the site.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • solar cell tester,solar module tester,EL tester

    Our main products includes: Solar Cell Tester, Auto Solar Cell Tester, Solar ModuleTester, Auto Online Solar ModuleTester, Solar Module EL Tester, Auto Online Solar Module EL Tester, Solar Simulator and related test equipment.

  • Membrane Electrode Assemblies

    FuelCellsEtc is well-known for the high quality of our custom Membrane Electrode Assemblies (MEAs). We can produce any quantity of MEAs and have no minimum order requirements. We are equally at home providing any custom loading you may need and can even use your own catalysts, membranes or Gas Diffusion Layers.

    By Fuel Cells Etc based in College Station, TEXAS (USA).

  • Transformer oil purification

    By Ecofix Pty Ltd. based in Sydney, AUSTRALIA.

  • Wind monitoring for the wind energy industry

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Coal Fines Drying

    Created during the crushing and drying phases of coal mining, coal fines (particles smaller than 6mm) not only present disposal issues, they can pose a health hazard to personnel and a contamination risk to the site. However, if processed correctly, coal fines can be converted into a fuel source making them a valuable commodity. It is estimated that coal fines, once properly processed, could satisfy more than 5% of the U.S. yearly demand for coal. Control costs, raise profits, and protect the environment by consulting Vulcan® Systems about your coal fines project. Our experts are here to help you find the right drying system to meet your needs. We can recover close to 100% of the value of the coal with our Coal Fines Drying System. At Vulcan® Systems, we design, manufacture, and install each system to deliver the highest value and quality, and our service extends well beyond commissioning.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Fly Ash Drying

    In tune with industry trends, public scrutiny, government regulation, water constraints, etc., coal power plants here and abroad are striving to eliminate their ash ponds and replace them with dry solutions. If you are considering a transition from wet to dry ash handling, Vulcan® Systems can help. Vulcan® Fly Ash Drying Systems are custom-designed and manufactured to suit the customer's individual project needs.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Evaporation technology for photovoltaic & microelectronics industries

    The manufacturing process of the cells that make up the photovoltaic systems and the printed circuits require water in quantity and high quality. This water has to be managed wisely so as not to affect the productivity and the expenses of the plant.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Gas infusion technology solutions for the CO2 capture with solutions4CO2

    S4CO2`s Gas inFusion technology extracts CO2, NO2, and SO2 from flue gas and biogas and efficiently mass transfers high concentrations of the extracted CO2 into water. The technology is highly modular, dissolves separated gases into water in a bubbleless fashion, is energy efficient, and operates at ambient pressures. Uses include proven rapid acceleration of algae growth for third generation biofuels production, nutraceuticals, pharmaceuticals, animal / aqua feed, mineralization and separation into clean commercial CO2.

    By inVentures Technologies Incorporated. based in New Brunswick, NEW BRUNSWICK (CANADA).

  • Organic Rankine Cycles for Biomass Combustion

    The Triogen ORC can be used with biomass combustion, for example sawdust, chips, bark and treated wood; and other biomasses, such as straw, rice, husks and bio-sludge, as well as other high organic-content waste. The Triogen ORC will be connected to the combustor. The Triogen ORC converts the flue gasses from the combustor into electricity.

    By Tri-O-Gen B.V. based in Goor, DE, NETHERLANDS.

  • Agitation and mixing solutions for bio technology

    The Biotechnology market is ever changing and on the leading edge of technology changes.  New products are continuously under development and agitation and mixing is used throughout the process.   A process may require any or a combination of the following:  blending, solids handling including incorporation/dissolving/suspension, mass transfer, and solids and heat transfer.   The scale for Biotechnology reactors and support units range from a few liters to several cubic meters and from small laboratory units to large scale fermenters.   Biotechnology applications also require vendors who have strong R&D departments and laboratory facilities, polished and aseptic designs, easy drainability and cleanability designs, material validation, quality control programs specific to the project, and are able to meet governing specifications and directives such as FDA, USP, ASME-BPE, and cGMP requirements.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems offered by Ammonit meet the highest standards of quality and are designed for the local site conditions with regard to sensor performance, communication system and power supply.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Value-Added Services for Energy & Infrastructure

    Global demand for energy and infrastructures is increasing rapidly due to economic and population growth. New challenges are created by the need to fulfil the societal demand for energy and mobility, the necessity to reduce emissions and pollutants, and obligations to comply with environmental regulations. Satellite Earth observation is a highly cost-effective means for the assessment of energy demand and renewable energy potential, monitoring of infrastructure development, environmental impact assessment and the identification of risks to infrastructural assets.

    By GeoVille Information Systems GmbH based in Innsbruck, AUSTRIA.

  • Biogas monitoring

    meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of methane.

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • Steam Traps

    Steam traps constantly fail and need replacing. Steam traps are problematic on every plant. Delta Venturi Steam Traps remove these problems, are guaranteed for 10 years and do not leak steam, ever.

    By Delta Steam Systems based in SOUTH AFRICA.

  • Remove metals from recycled wood

    The HogMag is used in this scenario to remove the metals. Ferrous and Non-ferrous metals must be removed prior to burning as the metal swill damages the grates in the burner causing downtime and associated costs. Higher quality recycled woodchip is required for biomass fuel.

    By EcoHog Ltd based in Carrickmore, NORTHERN IRELAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you