Applications available in France
-
Heat recovery from engines
Diesel engines typically convert no more than 33% of the energy contained in their fuel> in mechanical energy; about 25% of the energy input ends up in the cooling circuit and 33% in the exhaust gases (source: SAE ). So, it is evident how any intervention having the purpose of recovering at least a part of that large waste of energy is ...
By Zuccato Energia Srl based in Verona, ITALY.
-
Energy from solar heat
Zuccato Energia ORC systems can be easily used to realize thermodynamic solar plants, in particular hybrid solar plants, thanks to their excellent performances when operating under partial load – i.e. when the thermal input is lower than nominal, a situation that happens often in this type of ...
By Zuccato Energia Srl based in Verona, ITALY.
-
Gas Turbine Generator for Industrial & Commercial Solution
To ease the process of integrating the OP16 Gas Turbine into your current or new application, OPRA Turbines can assist by providing process know-how and knowledge of best practice. Are you looking for a turnkey solution? OPRA works with an international network of Oil & Gas partners who are experts in integrating our equipment into existing or new ...
By OPRA Turbines based in Hengelo, NETHERLANDS.
-
Hydronix Sensors for Wood Pellets
To monitor and control the feed rate of wood pellets into industrial ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Filter for Oil Refining - FCC Fractionator and Pipestill
PROCESS INFORMATION: The Fractionator is fed from the reactor and side strippers are injected with steam. Naphtha and Light Cycle Oil are produced. In a Pipestill, fed from a crude furnace, the side strippers produce Jet A, Gas Oil and Diesel or Heavy Gas ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Groundbreaking Direct Hydraulic Drive Technology for Energy and Utilities
IMPROVING AVAILABILITY AND PRODUCTIVITY FOR ENERGY PRODUCTION. ON LAND AND AT SEA. The energy sector is a complex and inter-related network of companies, directly and indirectly, involved in the production and sale of energy, including fuel extraction, manufacturing, refining and distribution. The industry faces the challenge of a trend towards higher energy costs and unscheduled standstill, or downtime is extremely expensive. Therefore, maximum power must be generated at the lowest possible operating costs ...
By Hägglunds based in Mellansel, SWEDEN.
-
Groundbreaking Direct Hydraulic Drive Technology for Materials and Resources
SUPERIOR ROBUSTNESS WITH ABSOLUTE PRECISION. The use of natural resources for economic growth from pulp and paper production, metallurgy and glass-making to sugar and rubber processing requires equipment that can stand up to the harshest conditions, providing the power and control to get the job done right. High availability in a rough environment is important so that continuous processes can run smoothly. That is why plant engineers and users need reliable automation partners. You can rely on Bosch Rexroth to ...
By Hägglunds based in Mellansel, SWEDEN.
-
Membrane Electrode Assemblies
FuelCellsEtc is well-known for the high quality of our custom Membrane Electrode Assemblies (MEAs). We can produce any quantity of MEAs and have no minimum order requirements. We are equally at home providing any custom loading you may need and can even use your own catalysts, membranes or Gas Diffusion ...
By Fuel Cells Etc based in College Station, TEXAS (USA).
-
Environmental technology for petroleum refineries industry
Particulary high demands are placed on vacuum systems used in this industrial area. Exactly matching Körting steam jet vacuum pumps and Körting surface condensers fulfil the highest requirements. A reliable design for optimum consumption figures can be guaranteed at all times because of our company's specially developed design software for these ...
By Körting Hannover AG based in Hannover, GERMANY.
-
Specialty Cleaners and Lubricants for Solar Industry
IPC manufactures specialty detergents for solar panel cleaning applications. Our products remove slurry, partihttp://www.ipcol.com/images/solar.gifculates, oil, and organic debris from solar panels both during the manufacturing process and in the field. Our products are excellent glass cleaners and are designed to clean delicate surfaces without leaving any interfering residues after rinsing. They are safe for use on glass, metal, plastic, and many other surfaces. For most applications a 0.5% - 1.0% solution is ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Very large waste gas volumes with low contaminant concentration
Example: Electronics industry. Similar tasks: Paint shops, spectacle coating, coating on the inside of ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
High-speed turbine machines for precision casting
We cooperate with leading world manufacturers of turbochargers, combustion turbines, aviation components and insulation materials based on glass ...
By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.
-
Cleaners for Semiconductors/electronics industry
Our cleaners are used in the manufacturing of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items. They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals. When rinsed properly our products leave no residue and your precision parts are ready for further ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Water analyzers for Power generation industry
Power generation is the process of converting / transforming primary energy sources (e.g. oil, natural gas, and hydro) into easy-to-use and easy-to-transport energy (secondary energy), e.g. electricity. For that purpose, there are several methods of generating electricity ...
By LAR Process Analysers - a brand by Process Insights, Inc. based in Berlin, GERMANY.
-
Solar Energy for Apartment Buildings
Providing heating, cooling and hot water for apartment buildings uses a lot of energy. Creating a sustainable residential environment in energy-efficient buildings is an important goal for the future. Rising energy prices are the driving force behind finding new solutions that allow buildings to become more self-sufficient in terms of energy. Solar collectors that concentrate the sunlight provide a lot of advantages for the purchaser. Read more about our products and discover how you can profit from using solar ...
By Absolicon Solar Collector AB based in Härnösand, SWEDEN.
-
Industrial power solutions for the nuclear industry
A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition, ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Industrial incineration solutions for the recycling sector, waste collectors
RDF (Refuse Derived Fuels). SRF (Solid Recovered Fuels). Plastics attached to other materials. Foam materials & insulation. Car frag. Rubber & scrap tyres. E-waste. Synthetic fibre waste (polyesters, polyacryl, polypropene and other plastics). Treated or contaminated wood. Combustible construction & demolition waste ...
By Dutch Incinerators BV based in Terneuzen, NETHERLANDS.
-
Heat Exchangers for Energy and Environmental Technology
The responsible care for the environment and the availability of energy resources are increasingly taking centre stage. We are planning for this, and exceed your requirements in respect to heat exchange in the fields of energy and heating, and of power stations and environmental ...
By APL Apparatebau GmbH based in Hopfgarten, AUSTRIA.
-
Hydrogen gas solutions for refinery hydrogen sector
ITM Power can provide a clean, on-site hydrogen supply which will decarbonise the refining process and reduce emissions. Refinery’s use vast quantities of hydrogen in the de-sulfurization of crude oil to make petrol and diesel. Recently with the demand of diesel increasing, this has led to a demand increase for hydrogen, as diesel requires more refining than petrol. Currently hydrogen used in this process is made via steam methane reformation (SMR) which usually involves natural gas for the feedstock for the ...
By ITM Power based in Sheffield, UNITED KINGDOM.
-
Incinerators solutions for land installations sector
Atlas Incinerators often supply incinerators to the Power Plant market where a containerised or skid-mounted solution is required. The customer is typically a major generator manufacturer who has to offer a turn-key power plant to a developing country. In such applications our incinerators are required to run 24/7, 365 days per year, burning sludge oil. Other installations have required that our incinerators operate in remote and often harsh environments such as environmental clean up in Congo or The Royal Danish ...
By Atlas Incinerators ApS based in Vordingborg, DENMARK.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you