Applications available in Haiti

Energy Storage solutions for lithium-ion battery electrode manufacturing.

By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Dürr MEGTEC’s industry-leading experience in air handling, drying, heating, cooling, process and combustion control can help improve the operating efficiency of your facility and maximize the performance of your equipment. By analyzing current process energy usage, we can offer solutions to reduce your energy consumption.

By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with...

By Metrohm AG based in Herisau, SWITZERLAND.

Compressor stations are located at intervals of every 40-70 miles along a gas pipeline to compress the gas to a specified pressure, thereby allowing it to continue traveling along the pipeline to its destination. Compressor stations require filter separators that remove liquids, dirt, particles, and other impurities from the natural gas, and CECO offers considerable expertise at separation for gas pipeline compressor stations.

By CECO Environmental based in Dallas, TEXAS (USA).

A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition,...

By CECO Environmental based in Dallas, TEXAS (USA).

Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was needed.

By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

The TD-4100XD, with its UV fluorescence technology and non-contact flow cell, has very strong advantages over any other oil in water monitor for this application.

By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

Braking systems solutions for the renewable energy sector.

By Hilliard Corporation based in Elmira, NEW YORK (USA).

For particulate matter (PM) emission control in high temperature exhaust streams, such as those from biomass or coal boilers and heaters, common dedusters such as cyclones and multicyclones are not able to comply with current emission limits. This is mainly due to their low efficiency, particularly for small particles (less than 10µm). In order to meet emission limits this usually requires an additional investment in a final stage deduster. Bag filters (BF) are very efficient dedusters. They can also be...

By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

Cleaner burning than other fossil fuels, the combustion of natural gas produces negligible amounts of sulfur, mercury, and particulates. However, natural gas does produce nitrogen oxides (NOx), which contributes to smog.

By CECO Environmental based in Dallas, TEXAS (USA).

Energy storage in batteries or chemical fuels such as hydrogen or synthetic natural gas (produced through water electrolysis) will be crucial to the worldwide large scale deployment of fluctuating renewable energies.

By Industrie De Nora S.p.A. | De Nora Water Technologies based in Milan, ITALY.

The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

Methane is a powerful greenhouse gas and should be destroyed before it enters the atmosphere. Flaring is a common solution for gas with CH4 10% - 40%.

By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

Optical instruments called fluorometers can very easily detect and measure dissolved petroleum hydrocarbons in water, and at very low concentrations. As shown in the study below, TD-4100 series monitors are able to measure xylene continuously over four consecutive weeks with a direct correlation coefficient of 0.9967 compared to GC grab sample analysis.

By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

By Metrohm AG based in Herisau, SWITZERLAND.

We are committed to providing mixed metal oxide (MMO)-coated anodes and electrochemical technologies for the electronics industry. Listening to the industrial needs and main drivers, we have developed a high quality and reliable MMO-coated titanium anode for the electrodeposition of copper, gold and other metals on printed circuit boards (PCB) in replacement of soluble anodes.

By Industrie De Nora S.p.A. | De Nora Water Technologies based in Milan, ITALY.

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM.

Drive train solutions for the outdoor power equipment sector.

By Hilliard Corporation based in Elmira, NEW YORK (USA).