Applications available in Indonesia

Monitoring the impact of Hydropower plant activities on water bodies can be important for regulatory compliance and modeling purposes.

By The OTT Hydromet Group based in Kempten, GERMANY.

Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities regard energy consumption. Process equipment and air pollution control systems installed several years ago may not reflect the new energy cons

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Large Magnets (Usually Electromagnets as shown) are often supplied to remove ferrous contamination from raw feed stock in Power Stations, such as Biomass or Coal.

By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

By Metrohm AG based in Herisau, SWITZERLAND.

Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM.

By Pollution Analytical Equipment based in Budrio (Bologna), ITALY.

WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

CTP's expertise with different coating systems, and an energy-saving pre-heater, protect the installation from corrosion even when waste gases are humid.

By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.

Concentration peaks and liquid waste posed a tough challenge on the air pollution control system. With the CTP solution, this waste is not only disposed of but also reduces the burner energy considerably.

By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.

ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

Biogas is a natural gas also known as biofuel or biomass and is produced by breaking down organic material such as household waste, manure and crops grown specifically for biofuel with temperature-sensitive microbes and capturing the by-products.

By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable energy on the grid requires powerful energy storage and conversion devices, such as supercapacitors, batteries, or fuel cells.

By Metrohm AG based in Herisau, SWITZERLAND.

Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with fossil or biogenic products, we are your specialist when it comes to analyzing them in accordance with international standards.

By Metrohm AG based in Herisau, SWITZERLAND.

Pieralisi technology is widely applied in plants that produce energy from Manure (biogas) and alternative energy production from biomass, and, in this industry.

By Pieralisi Group based in Jesi, ITALY.

The TD-4100XD, with its UV fluorescence technology and non-contact flow cell, has very strong advantages over any other oil in water monitor for this application.

By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was needed.

By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

Sierra thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).