Applications available in Malaysia

  • Premium

    Control corrosion for power plants

    By InduMar Products, Inc. based in Houston, TEXAS (USA).

  • Premium

    Corrosion-resistant materials for the power industry

    Sauereisen is the most widely known international company to supply corrosion-resistant coatings, mortars and gunitable refractory linings for flue gas applications in the power industry. For more than half a century, our cost-effective corrosion-resistant materials have provided solutions for power plants and their various components where the infrastructure would otherwise be threatened by corrosion. Our diverse product line includes potassium silicate, novolac epoxy, vinyl ester and urethane formulations...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Wind power solutions for the off-grid systems sector

    Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

    By XANT NV based in Brussels, BELGIUM.

  • Premium

    Instruments and analyzers for PV modules performance assesment

    Usually, the performance of a PV module is measured at the factory under the so-called Standard Test Conditions (STC), described in IEC 60904. This is a convenient test method that can be integrated in routine production procedures. However, the indoor measurement of the STC PV performance reveals the power production of the module at only one particular measurement condition.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for PV site solar monitoring

    PV performance measurements under real outdoor conditions are done in may different ways. However, the concept of all performance investigations is to relate the input energy, which is the solar radiative flux, to the output energy, which is the electrical power produced by the PV module. EKO’s Solar Monitoring Stations, referred to as SMS, is the dedicated facility for this type of evaluation.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for stability monitoring of sun simulators

    Monitoring the stability of a sun simulator enables the researcher to improve the stability of the PV cell and precision of the I-V measurement. The sun simulator is for example used to test the produced PV solar panel and classify it according to the STC standardization.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for measure spectral irradiance of sun simulator

    Sun simulators are available in different classes indicating the performance characteristics by the combination of three letters (A,B or C) (according to IEC 60904, JIS 8912 and ASTM E 927-05). Each letter represents respectively the spectral match with the solar spectrum (1000 W/m2, AM 1.5), uniformity of the light field and temporary stability. Class AAA are considered as most accurate and have an ideal spectral match between 0.75 and 1.25, max. 2.0% non-uniformity and 0.5% nonstability according to the IEC...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for measurement of engergy losses in building

    The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location) and building construction (Material). On site measurements are possible with EKO thin film heat flow sensors which can be integrated with building walls. Evaluation of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Resin technology solutions for the catalysis products

    While ordinary commercial styrene-based sulfonic acid resins may often be used for chemical reactions catalyzed by the H+ or M+ ions, faster process times, better yields, and higher product purity may be obtained by using a properly designed and purified catalyst. Purolite catalyst resins are supplied either completely water-swollen, or dried to specification.

    By Purolite Corporation based in Bala Cynwyd, PENNSYLVANIA (USA).

  • Premium

    Strategic market research solutions for hydropower & renewable energy industry

    Bringing together the world’s most respected hydropower and renewable energy information resources under one roof, PennWell dominates the market with an unparalleled network of publications, events and websites. Get news and information in both digital and print format, participate in trade show and conference events worldwide, understand global markets and discover expert resources for technology, finance, and policy knowledge. More than 500,000 renewable energy professionals rely on PennWell’s...

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Sensor for Biogas

    Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Very large waste gas volumes with low contaminant concentration

    Example: Electronics industry. Similar tasks: Paint shops, spectacle coating, coating on the inside of cans.

  • Premium

    Anaerobic water purification systems for biogas desulphurisation

    Biogas is increasingly important as source of sustainable energy. When biogas is produced through any form of anaerobic digestion, it will be mostly polluted with hydrogen sulphide. The concentrations can vary from 200 ppm up to several volume %.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Centrifuges for edible fats, oils & biofuels

    Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Process instrumentation and analytics solutions for biofuels industry

    In the field of renewable energy, our comprehensive portfolio of reliable, durable, easy-to-use products for process instrumentation and analytics provides a solid foundation for mastering the complex processes in this industry.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you