Applications available in Peru

  • Waste gas treatment for the semiconductor industry

    In the early 1990s no appropriate and comprehensive technical solution had been available for waste gas treatment in the semiconductor industry. Back then as well as today many industrial and research production procedures use process gases and generate waste gases. These waste gases, considered greenhouse gases, are toxic and/or highly flammable and very often pose a significant risk to production facilities and the environment. The semiconductor industry, for instance, uses perfluorocarbons, whose global warming potential is extremely high and therefore requires an efficient waste gas treatment. Combining and transporting different gases into a fab’s central waste gas system might produce highly flammable and highly explosive gaseous mixtures, which in the past has occasionally caused the total loss of entire production facilities. Particles contained within gases may also cause exhaust blockages. To eliminate these risks, process waste gases need to be treated at the “Point-of-Use” (POU) where harmful exhausts are abated immediately.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Radiation Worker Training

    Safe Training Systems (STS) are specialists in the provision of high quality, highly realistic simulated radiation monitors. STS have sold instruments for training to over 12 different countries across the world the majority of which have been used for Nuclear Worker training. The simulation system uses completely safe methods to recreate radiation fields and contaminated surfaces, this means that novice users can be taught basic principles without any exposure. There are of course also benefits to the trainer who again does not accumulate any dose and can therefore carry out more sessions. Instruments for workers vary widely from the Thermo Electra, RO2/20 and FH40G through to Ludlum model 3s and Automess 6150AD. With a wide range of instruments and sources there is always a solution to fit both budget and purpose - please contact sales@safetrainingsystems.com for more information.

    By Safe Training Systems Ltd based in Wokingham, UNITED KINGDOM.

  • Optimized solutions for the power industry

    Preventive maintenance: extend the life of critical machine parts by as much as 500%. Castolin Eutectic is your resource for protection, wear and joining solutions. We believe in working with our customers to find the best answers to their problems. As the wear problem expert, we can provide solutions for: manufacture of new finished and semi-finished wear parts, repair of broken parts, rebuilding of worn parts, protection against wear and corrosion, choice of fusion technologies and much more. Our expertise is unequivocal, and Castolin Eutectic continues to work with every major producer in the United States, Europe and Japan.

    By Castolin Eutectic based in St-Sulpice, SWITZERLAND.

  • Emission control & air dedusting for fuel oil boilers

    For PM emission control in high temperature exhaust streams, such as fuel oil boilers, usual dedusters such as bag filters are very maintenance demanding. Particularly, diesel and fuel particulates are very sticky and clog to filter elements, unless protection reagents are used. Flue gas cooling is also needed in front of the filter when temperatures are higher than 200 ºC. On the other hand, regular cyclones and multicyclones are frequently not able to reduce emissions to present emission limits.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Transformer Drying

    HERING has specialized in improving the life cycle of transformers. This starts during the transformer manufacturing process. The right transformer drying solution provides a low process time, but also protects the equipment from high internal stresses. Here, the HERING Drying Series product line offers state-of-the-art technology to speed up your transformer manufacturing operations. During the later life cycle of the transformer, not only drying the insulating oil extends the lifetime, but also drying the insulating material has a significant positive impact. For the latter, the HERING Drying Series – our product line of state-of-the-art vacuum transformer drying ovens – is your ideal choice.

    By Hering-VPT GmbH based in Dinkelsbühl, GERMANY.

  • Industrial solutions for energy efficiency in buildings

    Nowadays, the new laws of protection and sustainability, increased energy prices and greater environmental awareness and drive increased largely rational use of energy, not only for end users but also large consumers and systems thereby improving efficiency in buildings.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Wood pellet stove, wood pellet boiler

    Ceramic igniter for wood pellet stove ignition

    By FKK Corporation based in Kyoto, JAPAN.

  • Fuel and Energy Future - Advanced Plasma Oxidation

    Fuels made from vegetable oil like Jatropha, Castor, Moringa, other plants and even algae and converting oil containing waste materials into fuel, are the future. World wide research and testing are going on to implement and produce so called bio fuels. EnvoPark Thailand has 2 products and applications which first reduce the costs and dangers of Bio fuel production as widely used today through esterification which is a highly toxic and flammable process compared to the PBS cracking process which does not require any chemicals at all.

    By EnvoPark Thailand Co.Ltd. based in Bangkok, THAILAND.

  • Laboratory equipments for biofuels & algae

    We assist the rapidly growing global biofuels industry through our MQC analysers, speeding up analyses by up to 250 times, and dispensing with the need for hazardous solvents and skilled operators required for traditional methods such as soxhlet extraction and chromatography.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Transformer Fuel Bladder

    Transformer Oil Fuel Bladders used for storage oil when repairing substations. Its advantages are rapid deployment, large capacity, low-cost and resistant material. If you have any need kindly let us know, we will provide professional consulting services

  • Military Fuel Storage Bladder

    Military Fuel Storage Bladder used on fuel/oil storage for military applications. Its advantages are rapid deployment, large capacity, low-cost and resistant material. If you have any need kindly let us know, we will provide professional consulting servic

  • Transformer Oil Purification

    Transformer Oil Purification helps to extend the lifetime of transformer oil as it prevents the deterioration of the transformers' insulating fluids. Deterioration is mainly due to contamination, overheating, electrical stress, and oxidation. There are two main mechanisms occurring in the transformer oil during operation which cause deterioration: moisture contamination and oxidation. Both are fought with the help of transformer oil purifying and transformer oil regeneration systems.

    By Hering-VPT GmbH based in Dinkelsbühl, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you