Applications available in Tanzania

  • Pellet Classification for the Energy Industry

    Schenck Process provide systems that deal with wood pellets and chips feed solutions in the safest manner by using variable concepts and offering a range of conveying methods to deal with the differing feedstock characteristics. Alternative fuels are either discharged directly from trailers with “walking floors” or are delivered in tipping containers via road or rail. Schenck Process automated extraction screws, chain conveyor or pneumatic conveyors can be used to deliver the appropriate amount of fuel via a weighing check system for boiler feed regulation.

    By Schenck Process Group based in Sandnes, NORWAY.

  • Thin-film solar cells analysis for energy industry

    The research and development in the field of thin-film solar cells is an on-going process to improve efficiency even further, and to reduce manufacturing costs. X-ray fluorescence (XRF) is a field proven technology enabling users to control critical properties during development and manufacturing of the solar cells, such as elemental layer thickness and composition, improving quality and productivity, with resultant cost savings.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Storage and cover solution for bioenergy industry

    CST Industries is the world`s leading complete storage and cover solution provider for BioEnergy applications.

    By CST Industries Inc based in Kansas City, MISSOURI (USA).

  • Innovative Pump Technology for Energy Industry

    Different temperatures, varying media – and always the demand for reliability, long service life and efficiency. EDUR additionally offer the principle of application-specific pump design.

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for shaft work comes out in the exhaust gases, so these have either a high temperature or a high velocity. A catalyst is often used to treat these exhaust gases to comply with emissions regulations. EmeraChem has installed OEM and after-market catalyst in over 240 applications

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Environmental technology for oleochemistry industry

    The development and the application of these systems in this area were based on the idea of environment-friendly and reliable vacuum systems. Körting vacuum systems are suitable for diverse process steps such as drying, destillation, fractionating as well as transesterification during production of biodiesel, fatty acids, soaps and glycerine.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Material handling equipment for biomass energy industry

    You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Hukseflux Pyranometers

    Hukseflux offers a complete range of instruments for applications in solar energy / PV system performance monitoring. Please visit our website to discover the possibilities and solutions for your industry. Whatever your application is, Hukseflux offers the highest measurement accuracy in every pyranometer class. The overview below, of SR20 pyranometer features and benefits, gives you some of the reasons why the best pyranometers are made by Hukseflux. Click the image to visit our website.

    By Hukseflux Thermal Sensors B.V based in Delft, NETHERLANDS.

  • Measurement solution for AD-211 VOC speciation in natural gas, syngas & gasification

    Composition of Natural Gas, Syngas via VOC Speciation

    The composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on issues.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Investment services for electric power & natural gas industry

    We serve incumbents and new entrants in this rapidly expanding and liberalized sector. We help clients with issues related to organization, operations, and strategy. Our capabilities include organizational restructuring, building capabilities, and top-team management as well as capital investment, cost reductions, performance improvement, networks, and logistics. We also provide strategic direction on mission, sales, economics, and procurement.

    By McHewel Investment Group based in Toronto, ONTARIO (CANADA).

  • Waste recovery for energy & utilities

    In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental impact. This fly ash is subject to Air Pollution Control as it is contaminated with extremely high concentrations of heavy metals and toxic compounds like dioxins, linked to cancer and other health problems. Tetronics offers valuable waste recovery plants that can eliminate the hazardous element within the fly ash while generating an inert building aggregate with the remaining material.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric.

    Is it suitable for you?

    • Local utilities feeding district heating
    • Large sawmills
    • Pellet manufacturing companies
    • Manufacturers of MDF / OSB panels
    • Greenhouses
    • Wine industries

  • Wind Farm Noise Assessment by XL2

    One of the largest acoustic consulting firms in Australia was engaged by the New South Wales Department of Planning & Industry to conduct wind farm noise assessments. The goal was to perform a specialist, independent acoustic compliance audit of three major wind farms located near Canberra, Australia’s capital city. The objective of the study was to conduct a detailed noise assessment at residential dwellings near to the wind farms. Three wind farms near Canberra, Australia, were investigated. XL2 Sound Level Meters were operated on a continuous basis, typically over a six week period at each wind farm. The XL2 was battery powered to enable continuous noise logging for two weeks at a time at each residential site. The recorded data was then processed in accordance with the relevant standards specified in the conditions of consent for wind farms.

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Measurement and control systems for the controlling the level - electronically

    Discontinuous control is used mainly in smaller steam boilers with low output since the temperature fluctuations in the boiler are fairly great as a result of irregular refilling with water. Continuous control, on the other hand, permits still more economical steam generation with high quality.

    By IGEMA GmbH based in Münster, GERMANY.

  • Agitators for Biogas Blants

    Use the SUMA agitators to prevent the formation of floating and sinking substrate layers. Furthermore they ensure that the substrate maintains an equal temperature throughout. The homogeneously distribution of nutrients for the biological process enables more efficient gas flow out of the substrate.

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY.

  • Biogas Production Optimization

    By Dewaco Ltd based in LAITILA, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you