Applications available in Tanzania

  • On-demand renewable energy to assist solar/ wind microgrids

    Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Our technology options at a glance

    Click here to find out more about our technology and discover our interactive animation: http://www.envitec-biogas.com/microsite_envitec/#en

    By EnviTec Biogas AG based in Lohne, GERMANY.

  • Agitation and mixing solutions for bio technology

    The Biotechnology market is ever changing and on the leading edge of technology changes.  New products are continuously under development and agitation and mixing is used throughout the process.   A process may require any or a combination of the following:  blending, solids handling including incorporation/dissolving/suspension, mass transfer, and solids and heat transfer.   The scale for Biotechnology reactors and support units range from a few liters to several cubic meters and from small laboratory units to large scale fermenters.   Biotechnology applications also require vendors who have strong R&D departments and laboratory facilities, polished and aseptic designs, easy drainability and cleanability designs, material validation, quality control programs specific to the project, and are able to meet governing specifications and directives such as FDA, USP, ASME-BPE, and cGMP requirements.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Pyrolysis oil to diesel

    Pyrolysis oil to diesel continuous waste pyrolysis oil to diesel Solution: Oil refining machine Applicable: Tire oil, Plastic oil, Waste oil, Pyrolysis oil,Engine oil, Black oil, Heavy oil, etc Output: 85-90% good clean oil, the rest is slag and waste gas Heating fuel: Coal / wood/ fuel oil / gas Oil refining machine land size: 20X15m Reactor material:Q245/ Q345 Boiler plate

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Membrane Electrode Assemblies

    FuelCellsEtc is well-known for the high quality of our custom Membrane Electrode Assemblies (MEAs). We can produce any quantity of MEAs and have no minimum order requirements. We are equally at home providing any custom loading you may need and can even use your own catalysts, membranes or Gas Diffusion Layers.

    By Fuel Cells Etc based in College Station, TEXAS (USA).

  • Solar Energy Solutions

    The promise of solar power is critically important to solving today’s energy demands in an environmentally sensitive way. Gratton develops, design, and delivers the most reliable and cost-effective solar energy solutions. We carry everything you need for your renewable energy project. As technology in the renewable energy industry is dynamic, we are constantly evaluating new products and manufacturers to offer the best package to the environmentally and energy conscious public. Solar system clearly makes environmental sense by producing non-polluting, free, renewable energy. Gratton solar solutions include utility-scale Commercial, Residential, Industrial, Public, and Special solutions to address contemporary energy needs.

    By Gratton Arabia Ltd. based in Mississauga, ONTARIO (CANADA).

  • energy saving retrofits of injection molding machines

    V&T Technologies Co., Ltd. is recognized as the leader for energy saving retrofits of injection molding machines, has rich experiences with injection molding process: 25% - 70% energy saving, general above 50% energy saving with the existing parameters. Features of asynchronous servo drive: Field oriented control Built-in PID feedback closed loop controller Built-in brake unit (up to 15kW) Double RS-485 communication interfaces (RJ-45) and standard MODBUS communication protocol Precise current detection for system protection with safety ensured

    By V&T Technologies Co., Ltd. based in shenzhen, CHINA.

  • solar cell tester,solar module tester,EL tester

    Our main products includes: Solar Cell Tester, Auto Solar Cell Tester, Solar ModuleTester, Auto Online Solar ModuleTester, Solar Module EL Tester, Auto Online Solar Module EL Tester, Solar Simulator and related test equipment.

  • Coal Fines Drying

    Created during the crushing and drying phases of coal mining, coal fines (particles smaller than 6mm) not only present disposal issues, they can pose a health hazard to personnel and a contamination risk to the site. However, if processed correctly, coal fines can be converted into a fuel source making them a valuable commodity. It is estimated that coal fines, once properly processed, could satisfy more than 5% of the U.S. yearly demand for coal. Control costs, raise profits, and protect the environment by consulting Vulcan® Systems about your coal fines project. Our experts are here to help you find the right drying system to meet your needs. We can recover close to 100% of the value of the coal with our Coal Fines Drying System. At Vulcan® Systems, we design, manufacture, and install each system to deliver the highest value and quality, and our service extends well beyond commissioning.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Nuclear/District Survey or Environmental LIMS

    The Matrix LIMS Nuclear Monitoring Solution is a versatile, comprehensive LIMS solution that is available for district survey, liquid discharge, gaseous discharge and chemistry applications. It is a highly configurable software system, suitable for environmental and chemistry applications within the nuclear power generation industry. It applies to both generating stations and during decommissioning. Access to the system is controlled by a comprehensive security system utilising a class based structure relating to job function and / or authority.

    By Autoscribe Informatics based in Reading,, UNITED KINGDOM.

  • Steam Traps

    Steam traps constantly fail and need replacing. Steam traps are problematic on every plant. Delta Venturi Steam Traps remove these problems, are guaranteed for 10 years and do not leak steam, ever.

    By Delta Steam Systems based in SOUTH AFRICA.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems offered by Ammonit meet the highest standards of quality and are designed for the local site conditions with regard to sensor performance, communication system and power supply.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Fuel Cells

    Hiden gas/vapour analysers, optimized specifically for fuel cell research, offer a number of key benefits over other analysis techniques: rapid response (critical for temperature programmed studies), wide dynamic range, repeatability and linearity, are all of the up most importance when analyzing processes - particularly those in the presence of hydrogen - with widely varying gas concentrations. These features provide for accurate, stable and reproducible analysis of low molecular weight species, over a wide concentration range, present in a hydrogen rich atmosphere, and are found to be invaluable in applications such as the conversion of hydrocarbons, or alcohols, to hydrogen (reformers) for use in Proton Exchange Membrane (PEM) Fuel Cells.

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • Coal Combustion Residuals Disposal for Power Plants

    Coal combustion residuals (CCR) are generated during the power generation process and can include fly ash, bottom ash, boilerslag, and flue gas desulfurization (FGD) residuals. CCRs contain trace concentrations of heavy metals and therefore cannot be dumped or stored where rainwater can leach the metals. Liner systems can be used to contain the coal combustion by-products and protect them from leaching into the environment.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Knockers, Vibrators and Rappers for Dust Collectors

    The Cleveland Vibrator Company offers a wide range of pneumatic, piston-driven, industrial vibrators, knockers, impactors and rappers to dislodge collected dust from precipitator wires and plates or baghouse filter bags as well as keep dust free flowing in collection bins and hoppers.

    By Cleveland Vibrator Company based in Cleveland, OHIO (USA).

  • Catalyst Monitoring Services

    Catalyst monitoring services use periodic performance testing and lab analysis to track the condition of newly installed catalyst. The goal is to extend the life of the catalyst and it begins by establishing a relationship between operating hours and the catalyst’s condition and performance. Testing and analytical services reveal any decline in performance, direct catalyst maintenance services such as chemical washing, and provide a basis for estimating catalyst life. The scope of catalyst monitoring is scaled to the size of the installation – from a single reciprocating engine with one catalyst element, all the way up to a plant with multiple combustion turbines each having hundreds of catalyst elements. For more visit: www.emerachem.com/catalystmonitoring

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Continuous Gravimetric Feeding for Coal Mining Industry

    Applications in coal mining, the processing of non-ferrous metals, costeaning and preparation in mines require technology and materials capable of withstanding the most extreme conditions. Schenck Process solutions prevail where others give up. Our products are durable, indestructible and extremely reliable under the most difficult conditions.

    Whether large lumps or the finest fragment, wet or dry and irrespective of whether using ore, scrap, lime powder or hot sinter up to 1,000 °C – vibratory equipment supplied by Schenck Process can deal with all types of bulk materials. Every year around 10 million tonnes of raw coal are freed of impurities with the help of our coal washing plants – which represents our contribution to environmentally friendly energy production.

    Our customised application solutions include both heavy-duty and static weighing technology, conveying, screening, drying & cooling and dewatering. From planning and design through to the construction of the plant sections, reliable controls and connection to data systems.

    By Schenck Process Group based in Sandnes, NORWAY.

  • Biogas monitoring

    meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of methane.

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you