Applications available in Kansas
-
Premium
Incinerator solutions for the industrial / factory waste sector
General waste is an unwanted refuse material or substance. It may consist of materials from community or household activities (municipal, domestic or camp waste) or from industrial activities (manufacturing, mining or agricultural). Worldwide, the problem of waste accumulation is reaching threatening proportions. Landfill options are showing more and more weaknesses and are becoming extremely expensive. They are not an efficient solution. As a natural process, nature is converting landfill waste into highly ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Elemental analysis for the energy industry
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Senix ToughSonic sensors used in hydrofoil control on solar powered boat
Tecnico Solar Boat is a university project consisting of cross-degree engineering students from Instituto Superior Tecnico, the major engineering university in Portugal, that work together on the development of boats powered by renewable energies. Their main purpose is to participate in worldwide competitions. In 2019 they participated in the Monaco Solar & Energy Boat Challenge and finished in 2nd ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels
As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for biofuels
Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Venturi steam traps solutions for power generation industry
Venturi steam traps solutions for power generation ...
By Delta Steam Systems (DSS) based in Cape Town, SOUTH AFRICA.
-
Premium
Venturi steam traps solutions for heat exchangers sector
Venturi steam traps solutions for heat exchangers ...
By Delta Steam Systems (DSS) based in Cape Town, SOUTH AFRICA.
-
Premium
Braking systems solutions for the renewable energy sector
Braking systems solutions for the renewable energy ...
By Hilliard Corporation based in Elmira, NEW YORK (USA).
-
Premium
Electronic fuel control valves solutions for renewables industry
The growing awareness and use of biomass and hydrogen as renewable energy sources is critical to future energy growth. CCC technology has been used for years to enable stable engine operation using biogas that can vary greatly in quality. The advanced designs of the CCC embedded fuel valve controls allows seamless operation with all forms of renewable gas, including blended fuel ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Activated Carbon for Biogas Treatment
By Silcarbon Aktivkohle GmbH based in Kirchhundem, GERMANY.
-
Premium
Analytical Instruments for Chemical Analysis of Biofuels and Synthetic Fuels
Learn about Analytik Jena's elemental analysis techniques for the determination of metal and non-metal elements, e.g., carbon, sulfur, nitrogen and chlorine, in renewable bio- and secondary derived fuels and their variable source materials. The methods described are ideal for process control and adaptation, the quality control of final products and legal limit adherence, such as TS legal limits for ...
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Power generation solutions for ceramic production sector
The ceramic industry demands enormous amounts of energy for the drying processes of various material, including clay, glass, brick, tiles and fixtures. The best way to improve the efficiency of ceramic manufacturing is to connect a gas turbine to the spray dryer, providing heat along with electrical power for the ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for food and beverage
Manufacturers of food and beverages typically have a high volume of product passing through their facilities at all times. For this reason, any unexpected downtime can be very costly in terms of lost production. In addition, many food and beverage facilities have difficult challenges associated with lubricant contamination. Many of these facilities have a lot of water or steam being used to clean and sterilize products and packaging. Water can get into the lubrication oil and become a very troublesome contaminant. ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Electronic fuel control valves solutions for oil and gas industry
Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Syngas Analyzer Applys in Gasifier
Coal gasifier: The coal gasifier can be divided into four modes by the movement pattern of the coal in the gasifier: fixed bed (moving bed), fluidized bed, entrained bed and molten bed. While it can be summarized to atmospheric and high pressure styles according to the gasification operating pressure. Based on the feeding method, the coal gasifier contains solid and liquid feeding manners. In the light of the residue-discharge mode, it can be classified into solid and liquid patterns. In industry, the typical ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Drive train solutions for the All terrain vehicles/utility vehicles sector
The Hilliard Corporation has a complete line of Drive Train products for All terrain vehicles (ATV), and utility vehicles (UTV). Drive Train products solve some of the most common problems related to traction, on-demand 4WD engagement, and turf ...
By Hilliard Corporation based in Elmira, NEW YORK (USA).
-
Premium
Power generation solutions for pulp and paper production industry
The pulp and paper industry requires large amounts of power and heat in forms of hot air and steam. Solar’s best pulp and paper energy solutions use gas turbine-based cogeneration, better known as Combined Heat and Power (CHP). Cogeneration and CHP installations can reduce our customers’ carbon footprint and reduce energy consumption in pulp and paper production. Estimate your annual operatings savings for your plant using our value estimating ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Motion control solutions for the power generation sector
Motion control solutions for the power ...
By Hilliard Corporation based in Elmira, NEW YORK (USA).
-
Premium
Process instrumentation and analytics solutions for biofuels industry
In the field of renewable energy, our comprehensive portfolio of reliable, durable, easy-to-use products for process instrumentation and analytics provides a solid foundation for mastering the complex processes in this ...
By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).
-
Premium
Underwater cleaning solutions for nuclear power industry
Weda has supplied underwater cleaners to nuclear plants for more than 40 years. Weda has also been collaborating with Westinghouse since 2008, one of the leading suppliers of equipment for the nuclear industry. Westinghouse is handling the sales to the nuclear industry and you can contact them or us if you want to get more information. In collaboration with Westinghouse Electric AB Weda has developed the robot U-DEC (Underwater Decontamination Unit) for cleaning the walls and the bottom of the reactor basin before ...
By Weda AB based in Sodertalje, SWEDEN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you