Applications available in Nevada

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities regard energy consumption. Process equipment and air pollution control systems installed several years ago may not reflect the new energy cons

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Magnets for the power station industry

    Large Magnets (Usually Electromagnets as shown) are often supplied to remove ferrous contamination from raw feed stock in Power Stations, such as Biomass or Coal.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Thermal flowmeter solutions for energy applications

    Sierra thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Industrial vacuuming for power generating plants

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the alternative energy sector

    Best selection of alternative energy data loggers. Industrial, portable, remote, waterproof models with mixed-inputs and multi-channels. From simple applications up to monitoring large commercial PV arrays. Rental available. Alternative energy data loggers are suitable all applications. Simple data loggers that can be used to monitor wind speed for site surveys to complete systems that are used to monitor large commercial PV arrays are available.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Corrosion-resistant materials for the power industry

    Sauereisen is the most widely known international company to supply corrosion-resistant coatings, mortars and gunitable refractory linings for flue gas applications in the power industry. For more than half a century, our cost-effective corrosion-resistant materials have provided solutions for power plants and their various components where the infrastructure would otherwise be threatened by corrosion. Our diverse product line includes potassium silicate, novolac epoxy, vinyl ester and urethane formulations...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Instruments and analyzers for measurement of engergy losses in building

    The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location) and building construction (Material). On site measurements are possible with EKO thin film heat flow sensors which can be integrated with building walls. Evaluation of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Online monitoring solutions for the power generation industries

    Online monitoring solutions for the power generation industries.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Power Piping Solutions

    ISCO Industries offers solutions for various power piping applications in nuclear, fossil and renewable generation facilities. Whatever your power needs, ISCO Industries supplies pipe, fittings, fabricated fittings, related piping products and more.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Power Plant & Power Station Emissions Monitoring

    For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Cocoa shells making steam for bean processing

    Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power supply).

    By VYNCKE based in Harelbeke, BELGIUM.

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Innovative Pump Technology for Energy Industry

    Different temperatures, varying media – and always the demand for reliability, long service life and efficiency. EDUR additionally offer the principle of application-specific pump design.

  • Coal storage for the energy industry

    CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance free.

    By CST Industries Inc based in Kansas City, MISSOURI (USA).

  • Feed-in tariffs while avoiding low price periods

    Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Multiple fuels in multi media energy plants

    MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

    By VYNCKE based in Harelbeke, BELGIUM.

  • Absolute separation for the energy sector

    Energy will have more influence in the future than in the past, not only in the economic field, but also in social and individual behaviours. VITONE ECO supports its customers in this important sector supplying with plants, which assure great efficiency and whose use fits into an idea of sustainable development. VITONE ECO offers solutions for the treatment of mineral oils and fuels from refineries and lagoons, dehydration of plants producing biogas, production processes of non-fossil fuels, such as biodiesel...

    By Vitone Eco S.r.l. based in Bitonto, ITALY.

  • Water treatment research for power generation sector

    The power generation sector is the largest industrial user of water in the world, with a need for enormous volumes of water for cooling and ultrapure water to supply boiler systems. Investment in water treatment technologies for this sector is worth $2.1 billion. Rapid industrialisation and economic growth in South East Asia and Sub-Saharan Africa is increasing demand for electricity, requiring significant investment in water technologies. Environmental regulation will push for increased treatment of scrubber...

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you