Only show results available in Virginia? Ok

biogas flow measurement Applications

  • Biogas monitoring

    meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of...

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • Biogas measurement for the waste to energy industry

    In a recent project and the subject of this paper, Kurz engineers conducted a study that lead to a unique, new design that allows thermal flow meters to perform accurately within a wet digester gas environment. The testing environment applies to landfill and digester applications.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    High quality gas sensor solutions for biogas

    Fast, accurate and reliable measurement of CO2 and CH4 concentration. Methane and CO2 concentration measurements are a key part of the evaluation of the anaerobic digestion process. Too high or too low gas concentration levels can indicate a change in the efficiency of the fermentation process. AD process control systems measure the Methane content (and often the CO2 content) of the gas stream to control or evaluate the AD process and warn of problems. Edinburgh Sensors provide high performance OEM gas detectors...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Sensor for Biogas

    Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Agitators for Biogas Blants

    Use the SUMA agitators to prevent the formation of floating and sinking substrate layers. Furthermore they ensure that the substrate maintains an equal temperature throughout. The homogeneously distribution of nutrients for the biological process enables more efficient gas flow out of the substrate.

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY.

  • Premium

    Flow & Energy Management Solutions for HVAC & facility

    Measurement of cold and hot water flows / BTU energy in residential buildings as well as large building complexes such as hospitals, schools, factories and offices to monitor and control usage.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Flow & Energy Management Solutions for vehicle and vessel

    Several Spire Metering Technology flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Vehicle and Vessel Operation.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Biogas Monitoring for the Renewable Energy Industry

    AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield. Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate Gas parameters: CH4...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Flow & Energy Management Solutions for chemical industry

    Spire Metering provides non-intrusive measurement solutions for the chemical industry where aggressive and toxic liquids needed to be monitored.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Flow & Energy Management Solutions for pharmaceutical & semiconductor industry

    Several Spire Metering flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Pharmaceutical & Semiconductor Applications.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Flow & Energy Management Solutions for food and beverage industry

    For food and beverage processing plants, engaging in blending and batching of foods and drinks where issues of hygiene and contamination are of major concern. Also good for measuring the raw materials used for production.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Combustion measurement for engines

    Combustion processes occur in many modern technologies such as power production, heating, automotive and aircraft engines and even explosion research. The application areas range from fuel injection and mixing and flow velocity information to measurements of combustion species and soot concentration. Because of the impact on the global climate and the limited resources of fossil fuels, the importance of these applications is increasing, especially with respect to performance, fuel economy and CO2 emissions.

    By Dantec Dynamics based in Skovlunde, DENMARK.

  • Instruments and analyzers for measurement of engergy losses in building

    The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location) and building construction (Material). On site measurements are possible with EKO thin film heat flow sensors which can be integrated with building walls. Evaluation of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Emissions testing for industrial boilers and burners

    Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don`t worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350`s compact design is better for working on a platform or small...

    By Testo, Inc. based in Sparta, NEW JERSEY (USA).

  • Primary air control for coal-fired power plants

    Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty `Fly Ash` laden air.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you