Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable...
meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of...
Use the SUMA agitators to prevent the formation of floating and sinking substrate layers. Furthermore they ensure that the substrate maintains an equal temperature throughout. The homogeneously distribution of nutrients for the biological process enables more efficient gas flow out of the substrate.
Biogas is increasingly important as source of sustainable energy. When biogas is produced through any form of anaerobic digestion, it will be mostly polluted with hydrogen sulphide. The concentrations can vary from 200 ppm up to several volume %.
By Paques B.V.
Office in Burlington, MASSACHUSETTS (USA).
Fast, accurate and reliable measurement of CO2 and CH4 concentration. Methane and CO2 concentration measurements are a key part of the evaluation of the anaerobic digestion process. Too high or too low gas concentration levels can indicate a change in the efficiency of the fermentation process. AD process control systems measure the Methane content (and often the CO2 content) of the gas stream to control or evaluate the AD process and warn of problems. Edinburgh Sensors provide high performance OEM gas detectors...
AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield.
Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate
Gas parameters: CH4...
By AppliTek NV
Office in Boston, MASSACHUSETTS (USA).
Combining industrial performance and sustainable development while remaining competitive requires that the biofuels and biogas industry ensure industrial process safety, reduce operational costs, implement solutions providing significant savings and comply with environmental regulations, which ultimately lead to the public’s acceptance of a site.
Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.
HydroThane BSP technology is the best method for H2S removal combining deep H2S removal, a very high reliability and availability, and low lifecycle costs. The clean biogas can be used to produce electricity or to replace natural gas in a boiler.
In a recent project and the subject of this paper, Kurz engineers conducted a study that lead to a unique, new design that allows thermal flow meters to perform accurately within a wet digester gas environment. The testing environment applies to landfill and digester applications.