Biomass Power Plants generates power from biomass fuels such as wood pellets, bagasse and hog fuel. This fuels are susceptible to spontaneous combustion since it can occur at any stage of storage, production or transport. Early detection of fire or combustion is important for safety control.
If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.
Biomass produces a cleaner, renewable energy, reducing harmful carbon dioxide emissions, all while creating lower operating costs for power plants.
Biomass, the by-product of pulp and paper, agriculture, and municipal sludge, is perhaps the oldest source of renewable energy on Earth. Biomass' use in energy production is currently growing worldwide at an exponential rate.
You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.
Superior Boilers can be found burning digester methane gas, hydrogen, tallow (animal fats), biodiesel, sanderdust and recovering heat from biomass systems. In addition, Superior Boiler Works, Inc. has partnered with the biomass experts AESI located in Wichita, KS USA. AESI offers turnkey expertly designed biomass sytems and offers burn tests for a diverse array of materials
The Triogen ORC can be used with biomass combustion, for example sawdust, chips, bark and treated wood; and other biomasses, such as straw, rice, husks and bio-sludge, as well as other high organic-content waste. The Triogen ORC will be connected to the combustor. The Triogen ORC converts the flue gasses from the combustor into electricity.
With large assembly halls to heat and very strict temperature- and humidity reqirements for their painting lines, car assembly facilities are big consumers of power and thermal energy. VYNCKE designs and builds reliable biomass energy solutions capable of not only delivering enough heat to keep assembly halls and offices warm but also guarrantee the required steadiness and accuracy in heat flow needed for the critical painting process. Hot water or superheated water is used to regulate the humidity and temperature...
Companies engaged in biomass processing are increasingly adopting stationary pre-shredder technology to increase the delivery of consistent, specific carbon-neutral biomass energy products. This selected fuel is attractive to operators of incineration facilities who are keen to reduce their overall carbon emissions.
Converting wood waste into electricity—lumber mill off-cuts, wood from forestry thinnings (cleared of leaf matter), disposal of wooden pallets and crating (with nails removed). Wood is chipped, dried, and used to produce electricity, reducing electrical costs and paid disposal.
Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. Decomposing wood reverts all of its...
Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.
Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally,...
Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric.
Is it suitable for you?
Local utilities feeding district heating
Pellet manufacturing companies
Manufacturers of MDF / OSB panels
Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero waste.