biomass energy Applications - page 2

Energy from waste wood

If waste wood is utilized, woody biomass can be a form of renewable energy that complements solar and wind. Furthermore, gasifying the wood to produce electricity is a lot cleaner than disposing via controlled burns, and has a lower carbon footprint than decomposition, since decomposition often produces methane, and reverts all of the carbon to carbon dioxide, whereas with gasification, a portion is sequestered as char-ash.

By All Power Labs based in Berkeley, CALIFORNIA (USA).

Air Flow Measurement for the Biomass Energy Power Industry

By Promecon process measurement control GmbH based in Barleben, GERMANY.

Feed-in tariffs while avoiding low price periods

Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

By All Power Labs based in Berkeley, CALIFORNIA (USA).

Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

By STELA Laxhuber GmbH based in Massing, GERMANY.

Engineering services for thermal systems and biomass industry

Comprehensive development and test facilities for a range of thermal power and heat transfer systems are available at Energy Technology Centre.

By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

Industrial shredders for wood/biomass industry

Reduction of volumes (14-02, MK3). Consult us for your installations of treatment: wood waste, falls of manufacture, cases, pallets, barks.

By Precimeca based in Toulouse, FRANCE.

Industrial briquette presses for Biomass briquetting

Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally,...

By WEIMA based in Ilsfeld, GERMANY.

Organic Rankine Cycle for Biomass Cogeneration

Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric. Is it suitable for you? Local utilities feeding district heating Large sawmills Pellet manufacturing companies Manufacturers of MDF / OSB panels Greenhouses Wine industries

By Turboden srl - a Mitsubishi Heavy Industries company, based in Brescia, ITALY.

Multiple fuels in multi media energy plants

MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

By VYNCKE based in Harelbeke, BELGIUM.

Recycling Systems for the engineered fuel, biomass / RDF

Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero waste.

By Macpresse Europa S.R.L based in Vernate, ITALY.

Power Plant & Power Station Emissions Monitoring

For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

Gas Phase Reduction Technology for Sewage Sludge/Biomass Conversion

The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”). This is a highly effective, non-incineration method that converts all sewage sludge/biosolids into a methane product gas. A standalone GPR processing plant solely for biosolids can be built and at scale will be a highly desirable asset. The most efficient business model is to include the processing of biosolids with traditional Municipal Solid Waste (“MSW”). The standalone GPR processing...

By Natural Energy Systems Inc. (NES) based in Burlington, ONTARIO (CANADA).

Multiple process fuels to make hot gas and thermal oil

Particle board production requires huge amounts of hot gas at high temperatures for wood chips dryers. Besides generating heat for the main press, the thermal oil heater can generating hot water, steam or electricity (ORC application). VYNCKE offers a customized energy solution, burning a wide variety of process fuels and external fuels (all types of biomass).

By VYNCKE based in Harelbeke, BELGIUM.

CO2 neutral manufacturing of cars and trucks

With large assembly halls to heat and very strict temperature- and humidity reqirements for their painting lines, car assembly facilities are big consumers of power and thermal energy. VYNCKE designs and builds reliable biomass energy solutions capable of not only delivering enough heat to keep assembly halls and offices warm but also guarrantee the required steadiness and accuracy in heat flow needed for the critical painting process. Hot water or superheated water is used to regulate the humidity and temperature...

By VYNCKE based in Harelbeke, BELGIUM.

Organic Rankine Cycle for electricity from heat collected by solar collectors

Turboden units allow to convert the heat collected by solar collectors into electricity through an efficient thermodynamic cycle. Concentrating Solar Power systems with Turboden ORC can be cost-effective from 200 kW electric, depending on the irradiation of the installation site. Is it suitable for you? Concentrating solar collector field from 2 ha Hybrid CSP plants, e.g. solar+biomass

By Turboden srl - a Mitsubishi Heavy Industries company, based in Brescia, ITALY.

Add Supplier Profile