biomass heat and power Applications

Comprehensive development and test facilities for a range of thermal power and heat transfer systems are available at Energy Technology Centre.

By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric. Is it suitable for you? Local utilities feeding district heating Large sawmills Pellet manufacturing companies Manufacturers of MDF / OSB panels Greenhouses Wine industries

By Turboden srl - a Mitsubishi Heavy Industries company, based in Brescia, ITALY.

With large assembly halls to heat and very strict temperature- and humidity reqirements for their painting lines, car assembly facilities are big consumers of power and thermal energy. VYNCKE designs and builds reliable biomass energy solutions capable of not only delivering enough heat to keep assembly halls and offices warm but also guarrantee the required steadiness and accuracy in heat flow needed for the critical painting process. Hot water or superheated water is used to regulate the humidity and temperature...

By VYNCKE based in Harelbeke, BELGIUM.

A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition,...

By CECO Environmental based in Dallas, TEXAS (USA).

coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

By Runh Power Co.,Ltd based in Qingdao, CHINA.

Biomass Power Plants generates power from biomass fuels such as wood pellets, bagasse and hog fuel. This fuels are susceptible to spontaneous combustion since it can occur at any stage of storage, production or transport. Early detection of fire or combustion is important for safety control.

By VisionTIR based in Malaga, SPAIN.

Renewable energy from biomass: Solid biomass is intended to make a major contribution to the transition from fossil fuels to renewable energies. However, to reach the ambitious goals for heating and energy generation from woody biomass, it will need to be made available in large amounts. In keeping with our slogan, "Technology for a better environment", we have taken up the challenge of finding ways to do this.

By Komptech GmbH based in Frohnleiten, AUSTRIA.

Superior Boilers can be found burning digester methane gas, hydrogen, tallow (animal fats), biodiesel, sanderdust and recovering heat from biomass systems. In addition, Superior Boiler Works, Inc. has partnered with the biomass experts AESI located in Wichita, KS USA. AESI offers turnkey expertly designed biomass sytems and offers burn tests for a diverse array of materials

By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

Large Magnets (Usually Electromagnets as shown) are often supplied to remove ferrous contamination from raw feed stock in Power Stations, such as Biomass or Coal.

By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

Biomass produces a cleaner, renewable energy, reducing harmful carbon dioxide emissions, all while creating lower operating costs for power plants. Biomass, the by-product of pulp and paper, agriculture, and municipal sludge, is perhaps the oldest source of renewable energy on Earth. Biomass' use in energy production is currently growing worldwide at an exponential rate.

By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

Turboden units allow to convert the heat collected by solar collectors into electricity through an efficient thermodynamic cycle. Concentrating Solar Power systems with Turboden ORC can be cost-effective from 200 kW electric, depending on the irradiation of the installation site. Is it suitable for you? Concentrating solar collector field from 2 ha Hybrid CSP plants, e.g. solar+biomass

By Turboden srl - a Mitsubishi Heavy Industries company, based in Brescia, ITALY.

By BMH Technology Oy based in Rauma, FINLAND.

Geothermal power plants use heat from production wells to drive turbines to make power. CSP augments the heat from the wells to boost power production. Hyperlight uses the lowest cost materials, manufacturing method, and installation technique of any CSP technology yet deployed for this purpose.

By Hyperlight Energy based in Lakeside, CALIFORNIA (USA).

By BMH Technology Oy based in Rauma, FINLAND.

You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

By TerraSource Global based in St. Louis, MISSOURI (USA).

Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

By Körting Hannover AG based in Hannover, GERMANY.

Small rural communities or work camps are ideal applications for the Borealis wood power plant. Its application fit is best when the heat can be used to support a micro-heating-network for 25 homes or fewer in conjunction with a community centre as base load. Power needs must exceed the 45 kWh or it can be sold to the grid.

By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

By All Power Labs based in Berkeley, CALIFORNIA (USA).

Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

By Evapco Inc. based in Westminster, MARYLAND (USA).

Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).