Only show results available in Virginia? Ok

biomass heating system Applications

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Engineering services for thermal systems and biomass industry

    Comprehensive development and test facilities for a range of thermal power and heat transfer systems are available at Energy Technology Centre.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Premium

    Solid/liquid separation for feed & biofuel technologies

    ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Biomass Burning

    Superior Boilers can be found burning digester methane gas, hydrogen, tallow (animal fats), biodiesel, sanderdust and recovering heat from biomass systems. In addition, Superior Boiler Works, Inc. has partnered with the biomass experts AESI located in Wichita, KS USA. AESI offers turnkey expertly designed biomass sytems and offers burn tests for a diverse array of materials

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Waste handling solutions for the fuel from biomass industry

    Renewable energy from biomass: Solid biomass is intended to make a major contribution to the transition from fossil fuels to renewable energies. However, to reach the ambitious goals for heating and energy generation from woody biomass, it will need to be made available in large amounts. In keeping with our slogan, "Technology for a better environment", we have taken up the challenge of finding ways to do this.

    By Komptech GmbH based in Frohnleiten, AUSTRIA.

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric. Is it suitable for you? Local utilities feeding district heating Large sawmills Pellet manufacturing companies Manufacturers of MDF / OSB panels Greenhouses Wine industries

  • CO2 neutral manufacturing of cars and trucks

    With large assembly halls to heat and very strict temperature- and humidity reqirements for their painting lines, car assembly facilities are big consumers of power and thermal energy. VYNCKE designs and builds reliable biomass energy solutions capable of not only delivering enough heat to keep assembly halls and offices warm but also guarrantee the required steadiness and accuracy in heat flow needed for the critical painting process. Hot water or superheated water is used to regulate the humidity and temperature...

    By VYNCKE based in Harelbeke, BELGIUM.

  • Organic Rankine Cycle for electricity from heat collected by solar collectors

    Turboden units allow to convert the heat collected by solar collectors into electricity through an efficient thermodynamic cycle. Concentrating Solar Power systems with Turboden ORC can be cost-effective from 200 kW electric, depending on the irradiation of the installation site. Is it suitable for you? Concentrating solar collector field from 2 ha Hybrid CSP plants, e.g. solar+biomass

  • Material handling equipment for biomass energy industry

    You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Heating System Control

    By SchulerControl GmbH based in Titisee-Neustadt, GERMANY.

  • Multiple fuels in multi media energy plants

    MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

    By VYNCKE based in Harelbeke, BELGIUM.

  • Industrial briquette presses for Biomass briquetting

    Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally,...

    By WEIMA based in Ilsfeld, GERMANY.

  • Multiple process fuels to make hot gas and thermal oil

    Particle board production requires huge amounts of hot gas at high temperatures for wood chips dryers. Besides generating heat for the main press, the thermal oil heater can generating hot water, steam or electricity (ORC application). VYNCKE offers a customized energy solution, burning a wide variety of process fuels and external fuels (all types of biomass).

    By VYNCKE based in Harelbeke, BELGIUM.

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Recycling Systems for the engineered fuel, biomass / RDF

    Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero waste.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Measurement and control systems for the heat & steam technology

    Reduction of perating costs: The increased energy costs over the last years have made investments towards heat recovery solutions not only cost effective but profitable. With the support and input of our employees and our technical know how, are improvements and solutions concerning heat recovery become feasible.

    By IGEMA GmbH based in M√ľnster, GERMANY.

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Power Plant & Power Station Emissions Monitoring

    For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Biogas to Elecricity

    The range of supply of biogas to electricity solutions is from 10 kW to 1 MW. All the components of the solution are provided with matching capacities. It comprises the biogas digester system of the desired capacity, gas storage, biogas cleaning system to get rid of H2S from the gas, and the biogas genset. In the digester system, one may have a pre-digester or a feed mixing chamber or both. On the post-digester side, liquid from the slurry is separated and is recycled for feed preparation. It reduces the overall...

    By Kirloskar Integrated Technologies Limited based in Kothrud, INDIA.

  • Water Heating Systems for Aquaculture / Water Cooling Systems for Aquaculture

    Since 1988, Delta Hydronics has designed and installed numerous water heating and chilling solutions for life support systems using small equipment skid packages as well as large centralized mechanical systems for grow-out operations with mutiple heat exchangers and temperature requirements. Abalone farming Shrimp farming Tilapia farming Red Drum farming Trout farming Salmon farming Clams farming Many more When water temperature is critical for sustained growth and general health of commercial aquaculture...

    By Delta Hydronics based in Hudson, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you