Only show results available in Massachusetts? Ok

biomass power generation system Applications

  • Material handling equipment for biomass energy industry

    You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Power Plant & Power Station Emissions Monitoring

    For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Premium

    High-tech energy solution for the solar panel manufacturing industry

    The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun`s energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Engineering services for thermal systems and biomass industry

    Comprehensive development and test facilities for a range of thermal power and heat transfer systems are available at Energy Technology Centre.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • ORC solutions for Power generation

    Providers and operators of engine power plants and mobile electrical supply systems can use our container solutions to efficiently turn engine exhaust gases and/or cooling water into clean electricity. Our containers work perfectly with diesel and gas engines, increasing electricity generation by up to 100 kilowatts per 1,400 kilowatts of generator power.

    By Orcan Energy AG based in Munich, GERMANY.

  • Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. based in Westminster, MARYLAND (USA).

  • Solar Powered Home UPS

    The battery charging is done through the solar panel connected to reduce the energy used from grid power and to save the electricity bills. It increases battery life because of ripple free charging from solar panel.Complete logging and monitoring of Solar (optional) The system monitors the solar energy generated from the panels and stores the cumulative KWH generated. Monitoring through communication

    By Su-Kam Power Systems Ltd. based in Gurgaon, INDIA.

  • Oil separation and removal systems for Power generation plants industry

    In the power generation industry, petroleum-based products ranging from fuel oil and hydraulic fluid to lubricating greases and oils are found throughout every type of power generating plant or system. This includes coal-fired, gas-fired, hydroelectric, and nuclear.

    By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric. Is it suitable for you? Local utilities feeding district heating Large sawmills Pellet manufacturing companies Manufacturers of MDF / OSB panels Greenhouses Wine industries

  • Automatic Tube Cleaning System for Power Generation

    Innovas Technologies provides condenser tube cleaning systems for on-load cleaning of surface condensers in steam or combined cycle plants. You’ll get continuously clean, efficient surface condensers and increased power generation capacity. Better yet, your organization will also save on energy and maintenance costs.

    By Innovas Technologies LLC based in Coralville, IOWA (USA).

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Electric power solution for manufacturing, retail and entertainment industry

    The electric power solution of the general industry of Yanan has provided the electric power support for many factories, so as to reduce the high rejection rate of the factory due to the power outage, and effectively avoid the reputation loss and income loss of the retail and entertainment industry. 1. The control system with AMF system is provided, and connected with ATS, so as to ensure that the system can provide the electric power supply immediately after the main power supply goes out. 2. The connection with...

    By Fujian Fuan Mindong Yanan Electrical Co., Ltd. based in Ningde City, CHINA.

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • CO2 neutral manufacturing of cars and trucks

    With large assembly halls to heat and very strict temperature- and humidity reqirements for their painting lines, car assembly facilities are big consumers of power and thermal energy. VYNCKE designs and builds reliable biomass energy solutions capable of not only delivering enough heat to keep assembly halls and offices warm but also guarrantee the required steadiness and accuracy in heat flow needed for the critical painting process. Hot water or superheated water is used to regulate the humidity and temperature...

    By VYNCKE based in Harelbeke, BELGIUM.

  • Recycling Solutions for the energy and environment industry

    A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment, ANDRITZ...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Organic Rankine Cycle for electricity from heat collected by solar collectors

    Turboden units allow to convert the heat collected by solar collectors into electricity through an efficient thermodynamic cycle. Concentrating Solar Power systems with Turboden ORC can be cost-effective from 200 kW electric, depending on the irradiation of the installation site. Is it suitable for you? Concentrating solar collector field from 2 ha Hybrid CSP plants, e.g. solar+biomass

  • Electric power solution for mining industry

    The specific electric power solution of Yanan is applicable to the electric power demand of the mining, smelting factory and other special industries in complicated environment. Ultrastrong adaptability. Yanan generating unit can run normally below 3000m altitude and in the environment temperature of -15℃-+40℃. The mean time between failures shall not be lower than 2000h. Innovative design method. The unit is provided with the external fuel loading system, and equipped with the lock function, thereby,...

    By Fujian Fuan Mindong Yanan Electrical Co., Ltd. based in Ningde City, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you