burner Applications available in Virginia
-
Hydronix Sensors for Coal
as it is injected into the burners. The rate of injection is a direct function of the moisture content of the ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Combustion Technology for Hot Gas Production
°C or at 8bar overpressure. Depending on the fuel, the SWP and SWB burner series are ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Hydronix Sensors for Wood Pellets
To monitor and control the feed rate of wood pellets into industrial ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Alternative Fuel Production
with packaged burners which fire a variety of fuels from tallow to syngas to Hydrogen and most ...
By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).
-
Combustion Technology for Sulphur & Sulphur Acid
burners and combustion chamber systems for the combustion of liquid sulphur, with or without a ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Combustion Technology for Alternative Combustibles
to heat convection reformers. CS has been supplying burner systems for various concentrations of ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Oilfield Power Systems for Oil & Gas Industry
clean combustion of liquid fuels in gas turbines and industrial boilers and burners. In ...
By LPP Combustion, LLC based in Columbia, MARYLAND (USA).
-
Very large waste gas volumes with low contaminant concentration
Example: Electronics industry. Similar tasks: Paint shops, spectacle coating, coating on the inside of ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
LowNOx Systems for Nitrogenous Fuels
During the combustion of organic fuels with a high nitrogen content, NOx concentrations of up to several thousand mg or ppm are produced during a normal combustion process. The most efficient primary measure for NOx reduction is the staged combustion, where the combustion air is applied in two or more stages, depending on the ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Several waste gas streams: Highly contaminated oxygen-free waste gas, and medium waste gas stream
Example: Chemical industry. Similar tasks: Petrochemical and pharmaceutical ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Several waste gas streams: Short, high concentration peaks and a constant medium concentration
Example: Production of synthetic resin. Similar tasks: Chemical industry, batch processes in the pharmaceutical and plastics ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Primary air control for coal-fired power plants
Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty 'Fly Ash' laden ...
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Combustion Technology for Liquid Residue Incineration
The entire chemical, petrochemical and pharmaceutical industry produces huge amounts of liquid residues that can be thermally recycled. In response to the principle of zero waste emission, these are increasingly being converted into thermal energy directly where they are produced. This is usually done in adiabatic combustion chamber systems with subsequent waste heat utilisation. Industrial parks also have special hazardous waste incineration plants, operated by globally active waste management companies, in which ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Torbed process reactor technologies solutions for biomass processing sector
The advantages of the TORBED technologies for production of energy from biomass are: Faster and more precise temperature control - important with high alkali feed stocks to prevent accretions. Handling of irregularly shaped solid feed stocks – this minimizes feed stock shredding, chipping or milling. Low pressure drop allowing process gas recirculation for maximum turndown - 50:1 achievable. Rapid start-up and program change. Smaller size with easy installation. Simplicity in operation and ease of automation ...
By Torftech Group based in Thatcham, UNITED KINGDOM.
-
Biomass Pellet Based Cooking Solutions for Multipurpose Cooking
Cookstoves and pellet burners. Our equipment is an ideal replacement to LPG, Diesel and FO based ...
By Abellon Eco Equipments Ltd. based in Ahmedabad, INDIA.
-
Combustion analyzers for heat treating industry
Enerac Portable Combustion Analyzers for Heat Treating Applications. Heat treating is a group of industrial and metalworking processes used to alter the physical, and sometimes chemical, properties of a material. The most common application is metallurgical. Heat treatments are also used in the manufacture of many other materials, such as glass. Heat treatment involves the use of heating or chilling, normally to extreme temperatures, to achieve a desired result such as hardening or softening of a material. Heat ...
By Enerac, LLC based in Holbrook, NEW YORK (USA).
-
Custom thermal fluid system for a biodiesel processing application
Biodiesel and biodiesel blends are renewable, clean-burning alternative fuels produced from a diverse mix of waste oils, such as vegetable oil, soybean oil, and animal fats. A commercial-scale producer contracted with us to engineer a custom thermal fluid heating system for use in their bio-diesel processing plant. Since the demand for these sustainable, next-generation fuels is on a growth curve, we worked side-by-side with the customer at every stage—weighing all the alternatives, validating all of the ...
By Thermal Fluid Systems, Inc. (TFS) based in Kennesaw, GEORGIA (US) (USA).
-
Catalytic Heaters for Curing and Drying Industry
Applying the infrared principle with catalytic gas fired emitters is simply the most efficient method for drying and curing coated parts. Unlike convective systems, which heat the air, catalytic heaters emit IR energy directly to the substrate which is absorbed rapidly by the coating. There is an immediate temperature rise which initiates the gel stage within the 1st few minutes of exposure. Full cure times are dramatically reduced, generally by 50 to 80%. Your actual benefit can be determined beforehand by ...
By American Catalytic Technologies based in Clinton, CONNECTICUT (USA).
-
Monitoring Solutions for Biomass
Biomass Power Plants generates power from biomass fuels such as wood pellets, bagasse and hog fuel. This fuels are susceptible to spontaneous combustion since it can occur at any stage of storage, production or transport. Early detection of fire or combustion is important for safety ...
By VisionTIR based in Malaga, SPAIN.
-
Burners and combustion solutions for steel industry
. Burners for Pellet Plants, Sinter Plants, Stove Pilot Burners. Spares and Refurbishing of Heating ...
By Alliance Thermal Engineers based in Pune, INDIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you