Only show results in Virginia? Ok

coal-fired Applications

  • Primary air control for coal-fired power plants

    Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty `Fly Ash` laden air.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Coal Fines Drying

    Created during the crushing and drying phases of coal mining, coal fines (particles smaller than 6mm) not only present disposal issues, they can pose a health hazard to personnel and a contamination risk to the site. However, if processed correctly, coal fines can be converted into a fuel source making them a valuable commodity. It is estimated that coal fines, once properly processed, could satisfy more than 5% of the U.S. yearly demand for coal. Control costs, raise profits, and protect the environment by consulting VulcanĀ® Systems about your coal fines project. Our experts are here to help you find the right drying system to meet your needs. We can recover close to 100% of the value of the coal with our Coal Fines Drying System. At VulcanĀ® Systems, we design, manufacture, and install each system to deliver the highest value and quality, and our service extends well beyond commissioning.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Coal storage for the energy industry

    CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance free.

    By CST Industries Inc based in Kansas City, MISSOURI (USA).

  • Vertical mixing for coal power plants

    By REDOR sp. z o.o. based in Bielsko-Biała, POLAND.

  • Coal Combustion Residuals Disposal for Power Plants

    Coal combustion residuals (CCR) are generated during the power generation process and can include fly ash, bottom ash, boilerslag, and flue gas desulfurization (FGD) residuals. CCRs contain trace concentrations of heavy metals and therefore cannot be dumped or stored where rainwater can leach the metals. Liner systems can be used to contain the coal combustion by-products and protect them from leaching into the environment.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you