Only show results available in Connecticut? Ok

combined cycle geothermal Applications

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Organic Rankine Cycle for Electricity from Geothermal Resources

    Turboden ORC units can produce electricity from geothermal resources with medium to low temperature, typically ranging between 100°C and 180°C. Is it suitable for you? Low and medium temperature geothermal systems Enhanced Geothermal Systems

  • Premium

    Flow & Energy Management Solutions for power & thermal plant

    Spire Metering is a great fit for Power Plant, Thermal Energy Production Plants.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Level Monitoring and Control

    Level transmitters and Level switches are used to monitor and control the geothermal water

    By W.T. Maye, Inc. based in Knoxville, TENNESSEE (USA).

  • Automatic Tube Cleaning System for Power Generation

    Innovas Technologies provides condenser tube cleaning systems for on-load cleaning of surface condensers in steam or combined cycle plants. You’ll get continuously clean, efficient surface condensers and increased power generation capacity. Better yet, your organization will also save on energy and maintenance costs.

    By Innovas Technologies LLC based in Coralville, IOWA (USA).

  • Piping Solutions for Geothermal Applications

    ISCO Industries offers piping solutions for geothermal applications. Whatever your needs, ISCO Industries supplies pipe, fittings, fabricated fittings, related piping products and more.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Renewable energy products solutions for the geothermal hybrid + storage sector

    Geothermal power plants use heat from production wells to drive turbines to make power. CSP augments the heat from the wells to boost power production. Hyperlight uses the lowest cost materials, manufacturing method, and installation technique of any CSP technology yet deployed for this purpose.

    By Hyperlight Energy based in Lakeside, CALIFORNIA (USA).

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Organic Rankine Cycle for Electricity from Heat Recovery

    Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.

  • Engineering services for marine power industry

    Energy Technology Centre provides versatile facilities for the engineering development of key elements of marine power systems including mechanisms, flow systems and individual components. Hydraulic power packs with a range of actuators allow sinusoidal and profiled time histories to be created for reproducing typical wave motion. Accelerated life cycle testing and the ability to undertake component qualification helps to de-risk deployment of complete systems offshore.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Organic Rankine Cycle for electricity from heat collected by solar collectors

    Turboden units allow to convert the heat collected by solar collectors into electricity through an efficient thermodynamic cycle. Concentrating Solar Power systems with Turboden ORC can be cost-effective from 200 kW electric, depending on the irradiation of the installation site. Is it suitable for you? Concentrating solar collector field from 2 ha Hybrid CSP plants, e.g. solar+biomass

  • Organic Rankine Cycles for Biomass Combustion

    The Triogen ORC can be used with biomass combustion, for example sawdust, chips, bark and treated wood; and other biomasses, such as straw, rice, husks and bio-sludge, as well as other high organic-content waste. The Triogen ORC will be connected to the combustor. The Triogen ORC converts the flue gasses from the combustor into electricity.

    By Tri-O-Gen B.V. based in Goor, DE, NETHERLANDS.

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric. Is it suitable for you? Local utilities feeding district heating Large sawmills Pellet manufacturing companies Manufacturers of MDF / OSB panels Greenhouses Wine industries

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Biogas recovery for waste to energy industries

    HydroThane BSP technology is the best method for H2S removal combining deep H2S removal, a very high reliability and availability, and low lifecycle costs. The clean biogas can be used to produce electricity or to replace natural gas in a boiler.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Energy efficiency and emission reduction solutions for hospitals industry

    We help hospitals save money by reducing their fuel bills while also lowering their greenhouse gas emissions. Our proven solutions can increase the efficiency of your heating and steam system to as much as 95% with typical project paybacks (for our combined technologies) within three to five years.

    By Thermal Energy International Inc. based in Ottawa, ONTARIO (CANADA).

  • Energy from biogas and natural gas for agriculture

    You are a farmer and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

    By Wolf Power Systems GmbH based in Gorleben, GERMANY.

  • Energy from biogas and natural gas for the waste to energy industry

    You are a farmer/entrepreneur and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

    By Wolf Power Systems GmbH based in Gorleben, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you