combustion chamber Applications
-
Premium
Thermal waste gas purification of siliceous organic compounds
Example: Electrical industry. Similar tasks: Electronic industry, Coating, Waste ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Premium
Several waste gas streams: Short, high concentration peaks and a constant medium concentration
Example: Production of synthetic resin. Similar tasks: Chemical industry, batch processes in the pharmaceutical and plastics ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Combustion Technology for Sulphur & Sulphur Acid
For the majority of the licensors of sulphuric acid processes represented on the market, CS builds burners and combustion chamber systems for the combustion of liquid sulphur, with or without a downstream waste heat ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Combustion Technology for Liquid Residue Incineration
combustion chamber systems with subsequent waste heat utilisation. Industrial parks also have special hazardous waste incineration plants, operated by globally active waste management companies, in which both liquid and solid waste is ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
LowNOx Systems for Nitrogenous Fuels
During the combustion of organic fuels with a high nitrogen content, NOx concentrations of up to several thousand mg or ppm are produced during a normal combustion process. The most efficient primary measure for NOx reduction is the staged combustion, where the combustion air is applied in two or more ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Combustion Technology for Exhaust Gas and Air Combustion
Claus plants are used to convert H2S from natural gas and crude oil into liquid sulphur. For this purpose, the H2S-containing waste gas (Claus gas) is burnt sub-stoichiometrically in several stages, depending on the ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Wood Chip for Fired Boilers
There are several, different technologies for the combustion of wood chips. Wood chip-fired boilers are usually operating in a high performance area (for example underfeed stokers are available from lOkW to 2.5MW and grate furnaces are available up to 60MW). Therefore wood chip-fired boilers are often ...
By Energy Pellets Moerdijk b.v. based in Moerdijk, NETHERLANDS.
-
Thermal processes and sensor-based analysis solutions for waste incineration sector
and the resulting differences in combustion behavior, however, the fuel is often unevenly distributed on the grate, which causes fluctuating temperatures in the combustion ...
By ci-Tec GmbH based in Karlsruhe, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you