combustion technology Applications

Combustion Technology for Alternative Combustibles

convection reformers. CS has been supplying burner systems for various concentrations of H2 for all types of hydrogen production plants for over 10 years. Hydrogen has also always been an important fuel for the alternative combustion of steam ...

By CS Combustion Solutions GmbH based in Wien, AUSTRIA.

Combustion Technology for Liquid Residue Incineration

combustion chamber systems with subsequent waste heat utilisation. Industrial parks also have special hazardous waste incineration plants, operated by globally active waste management companies, in which both liquid and solid waste is ...

By CS Combustion Solutions GmbH based in Wien, AUSTRIA.

Combustion Technology for Exhaust Gas and Air Combustion

Claus plants are used to convert H2S from natural gas and crude oil into liquid sulphur. For this purpose, the H2S-containing waste gas (Claus gas) is burnt sub-stoichiometrically in several stages, depending on the ...

By CS Combustion Solutions GmbH based in Wien, AUSTRIA.

Combustion Technology for Sulphur & Sulphur Acid

For the majority of the licensors of sulphuric acid processes represented on the market, CS builds burners and combustion chamber systems for the combustion of liquid sulphur, with or without a downstream waste heat ...

By CS Combustion Solutions GmbH based in Wien, AUSTRIA.

Oilfield Power Systems for Oil & Gas Industry

Flared gases and NGLs can be re-purposed as fuel for flex-fuel, low-emissions LPP Combustion Power Systems, lowering production costs, reducing logistical burdens, and addressing Gas Capture Plan and other compliance issues with flaring and emissions. The Lean, Pre-mixed, Pre-vaporized (LPP) equipment enables ...

By LPP Combustion, LLC based in Columbia, MARYLAND (USA).

Conventional Power Generation Systems for Carbon-Negative Energy (CNE)

-negative technology that has generated significant interest is biomass energy production combined with carbon capture and storage (CCS), known as BioCCS or BECCS. BioCCS has enormous potential to remove significant amounts of the greenhouse gas (GHG) carbon dioxide (CO2) from the atmosphere while producing renewable ...

By Clean Energy Systems, Inc. (CES) based in Rancho Cordova, CALIFORNIA (USA).

Combustion measurement for engines

Combustion processes occur in many modern technologies such as power production, heating, automotive and aircraft engines and even explosion research. The application areas range from fuel injection and mixing and flow velocity information to measurements of combustion species and soot concentration. ...

By Dantec Dynamics based in Skovlunde, DENMARK.

Micro SNCR System for Small Biomass Boiler Industry

FlowVision’s Micro SNCR system has been specifically developed for the small biomass boiler industry. As more stringent emission regulations are forced upon the small scale boiler sector, post combustion NOx reduction technology is needed to achieve the limits. The ideal solution is to install an SNCR ...

By FlowVision A/S based in Odense N, DENMARK.

Rank Equipment for Engines

Reciprocating internal combustion engines are a widespread and well-known technology. They are available for a multitude of applications, with powers ranging from a few kilowatts to over 5 MW. Rank equipment can increase the power generation and, therefore, the efficiency of these ...

By Expander Tech S.L. based in La Vall d´Uixó, SPAIN.

Wood Chip for Fired Boilers

There are several, different technologies for the combustion of wood chips. Wood chip-fired boilers are usually operating in a high performance area (for example underfeed stokers are available from lOkW to 2.5MW and grate furnaces are available up to 60MW). Therefore wood chip-fired boilers are often ...

By Energy Pellets Moerdijk b.v. based in Moerdijk, NETHERLANDS.

Conventional Power Generation Systems for Fast Response, Peaking Power Plant/Black-Start Power Generator

The Clean Energy Systems oxy-fuel gas generator and OFT-J79 expander turbine are ideally suited to emergency start-up and peaking power plant applications. Conventional peaking power plants typically take 10 to 30 minutes or more to come online because of the need to warm up expensive NOx catalysts and bring the facility to its required operating temperature. CES power plants require less time to start up, cost less to run, and release effectively zero emissions to the ...

By Clean Energy Systems, Inc. (CES) based in Rancho Cordova, CALIFORNIA (USA).