Only show results in Connecticut? Ok

electricity from waste heat Applications

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Energy from biogas and natural gas for the waste to energy industry

    You are a farmer/entrepreneur and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

    By Wolf Power Systems GmbH based in Gorleben, GERMANY.

  • Biogas to Elecricity

    The range of supply of biogas to electricity solutions is from 10 kW to 1 MW. All the components of the solution are provided with matching capacities. It comprises the biogas digester system of the desired capacity, gas storage, biogas cleaning system to get rid of H2S from the gas, and the biogas genset. In the digester system, one may have a pre-digester or a feed mixing chamber or both. On the post-digester side, liquid from the slurry is separated and is recycled for feed preparation. It reduces the overall...

    By Kirloskar Integrated Technologies Limited based in Kothrud, INDIA.

  • Premium

    Environmental solutions for the process energy optimization & heat recovery

    Dürr MEGTEC’s industry-leading experience in air handling, drying, heating, cooling, process and combustion control can help improve the operating efficiency of your facility and maximize the performance of your equipment. By analyzing current process energy usage, we can offer solutions to reduce your energy consumption.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Waste tyre recycling fuel oil pyrolysis plant

    Waste tyre recycling the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant. You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution . As the fuel material used in Cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc. 2. Final diesel come out from our...

    By Henan DOING Renewable Energy Equipment Co.,ltd based in Zhengzhou, CHINA.

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Cement materials for Heating elements industry

    Heating Elements | Coils / Cartridge Heaters / Sheath; Thermally conductive cement. Enables transmission or dissipation of heat. Secures element and maintains assembly. High temperature resistance and electrical insulation.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Monitoring Heat Exchanger Leaks in Paper Plant

    Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was needed.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Organic Rankine Cycle for Electricity from Heat Recovery

    Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.

  • Biogas recovery

    Collect valuable biogas from anaerobic digestion systems with a GTI gas collection cover. In waste-to-energy projects, the collected biogas can be used as a renewable fuel to generate process heat or electricity, helping to offset energy costs.

    By Geomembrane Technologies, an Evoqua brand based in Fredericton, NEW BRUNSWICK (CANADA).

  • Determination of aromatic hydrocarbons in electrical insulating oils

    Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a transformer.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Organic Rankine Cycle for electricity from heat collected by solar collectors

    Turboden units allow to convert the heat collected by solar collectors into electricity through an efficient thermodynamic cycle. Concentrating Solar Power systems with Turboden ORC can be cost-effective from 200 kW electric, depending on the irradiation of the installation site. Is it suitable for you? Concentrating solar collector field from 2 ha Hybrid CSP plants, e.g. solar+biomass

  • Energy from biogas and natural gas for agriculture

    You are a farmer and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

    By Wolf Power Systems GmbH based in Gorleben, GERMANY.

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric. Is it suitable for you? Local utilities feeding district heating Large sawmills Pellet manufacturing companies Manufacturers of MDF / OSB panels Greenhouses Wine industries

  • Waste handling solutions for the fuel from biomass industry

    Renewable energy from biomass: Solid biomass is intended to make a major contribution to the transition from fossil fuels to renewable energies. However, to reach the ambitious goals for heating and energy generation from woody biomass, it will need to be made available in large amounts. In keeping with our slogan, "Technology for a better environment", we have taken up the challenge of finding ways to do this.

    By Komptech GmbH based in Frohnleiten, AUSTRIA.

  • Industrial power solutions for the nuclear industry

    A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition,...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Energy from waste wood

    If waste wood is utilized, woody biomass can be a form of renewable energy that complements solar and wind. Furthermore, gasifying the wood to produce electricity is a lot cleaner than disposing via controlled burns, and has a lower carbon footprint than decomposition, since decomposition often produces methane, and reverts all of the carbon to carbon dioxide, whereas with gasification, a portion is sequestered as char-ash.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Solutions for the energy sector

    New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective.

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • Premium

    Monitoring of leaks in heat exchangers

    Optical instruments called fluorometers can very easily detect and measure dissolved petroleum hydrocarbons in water, and at very low concentrations. As shown in the study below, TD-4100 series monitors are able to measure xylene continuously over four consecutive weeks with a direct correlation coefficient of 0.9967 compared to GC grab sample analysis.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you