Only show results available in Connecticut? Ok

energy analysis Applications

  • Biogas Analysis

    By MRU Instruments, Inc. based in Houston, TEXAS (USA).

  • Thermography analysis

    Thermography analysis to identify technical risks (e.g. hotspots, inactive modules and strings, etc.)

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Data analysis and visualization tools for dams & hydropower

    The U.S. Geological Survey and organizations around the world like BC Hydro of Canada and Mighty River Power in Australia use C Tech’s technology to model the geology and hydrology associated with dams and new hydropower sites.

    By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

  • Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Integrated real-time gas analysis solution for solar PV industry

    Solar technology as a renewable energy technology is spreading around the world, with major manufacturing operations occurring in China, Germany, Spain, and the U.S. For solar photovoltaics, specialty chemicals are required for the production of the photovoltaic materials.

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Marine envrionmental solutions for renewable energy industry

    Fugro EMU Limited is a specialist in renewable energy and has been involved in assisting clients in their site selection process for R2, Scottish Territorial Waters and R3 developments. In the initial site selection process, Fugro EMU will broadly highlight the environmental, socio-economic and technical issues of a given site through a combination of short term consultation, desk based studies and expert knowledge thereby allowing the client to make a site selection based on accepted scientific fact. Once a site...

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Catalyst Monitoring Services

    Catalyst monitoring services use periodic performance testing and lab analysis to track the condition of newly installed catalyst. The goal is to extend the life of the catalyst and it begins by establishing a relationship between operating hours and the catalyst’s condition and performance. Testing and analytical services reveal any decline in performance, direct catalyst maintenance services such as chemical washing, and provide a basis for estimating catalyst life. The scope of catalyst monitoring is scaled...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Wind farm noise monitoring

    Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind farm&rsquo...

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • Premium

    Machine condition monitoring for biofuels

    Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Flow & Energy Management Solutions for water & wastewater industry

    RH20 and EF10 , EF11, EF40 and MAG888 (semi-portable). Well-suited for checking installed meters, leakage determination, network analysis and flow survey.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to...

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you