Only show results in Massachusetts? Ok

energy distribution Applications

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Bioremediation solutions for power distribution industry

    Despite advances in technology, large oil-filled transformers are still the major component of the electric transmission substation. Many have been in service for years. One issue with these aging transformers is oil leaks. Even slight leaks, creating stains down the sides of transformers and oil circuit breakers, need to be addressed without outage. A bio-cleaner like iSorb is an ideal solution in that it doesn’t require water, sticks to vertical surfaces, and gets into corners and other tight spaces.

    By Beyond Environmental based in Geneva, ILLINOIS (USA).

  • Bearing solution for electricity distribution facility sector

    Deep Groove Ball Bearings, Angular Contact Ball Bearings, Self-Aligning Ball Bearings, Thrust Ball Bearings, and N Series Thin-Section Ball.

  • Measurement Systems for Power Industry

    Our clients around the world share something with you! They all have similar tasks and challenges to master their combustion to the desired targets of emmissions, efficiency (heat rate) and availability. Find out how we have jointly achieved higher targets in mastering combustion.

    By Promecon Process Measurement Control GmbH based in Barleben, GERMANY.

  • Premium

    Solutions for power generation infrastructure sector

    As the owner-operator of power generation facilities, your plants and supporting infrastructure are critical to your success. Our solutions span the entire asset lifecycle from design through construction and into operations. Coordinate capital projects and revamps, whether managed directly or through contractors, with solutions for multi-discipline design and analysis and project collaboration. You will bring new plants into production more quickly and manage revamps with confidence.

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

  • Premium

    Piping & ducting solutions for the power generation industry

    The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Optimized solutions for the power industry

    Preventive maintenance: extend the life of critical machine parts by as much as 500%. Castolin Eutectic is your resource for protection, wear and joining solutions. We believe in working with our customers to find the best answers to their problems. As the wear problem expert, we can provide solutions for: manufacture of new finished and semi-finished wear parts, repair of broken parts, rebuilding of worn parts, protection against wear and corrosion, choice of fusion technologies and much more. Our expertise is...

    By Castolin Eutectic based in St-Sulpice, SWITZERLAND.

  • Pumping solutions for power generating

    Fluids Handled - Lubricating oils, Fuel Oil, Fuel Flow Dividers.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Aluminium-Air Technology for Distributed Generation

    Long Duration Offers up to days and weeks of energy independence. Long Standby Can standby for years without losing performance. Available & Flexible Supports the grid by balancing intermittent energy sources. Zero Emission Keeps urban spaces clean. Cost-Effective Simple and abundant materials allow for low cost solutions. Safe & Quiet Great for residential neighborhoods and in-door facilities.

    By Phinergy based in Lod,, ISRAEL.

  • Aluminium-Air Technology for Mobile Energy

    Each machine is equipped with its own energy source, letting production lines become more flexible and easy to configure.

    By Phinergy based in Lod,, ISRAEL.

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Environmental solutions for the utilities & electrical transmission sector

    Power companies face access challenges as they move heavy vehicles across wet, soft ground for maintenance of power lines and utilities. Access is often through environmentally-sensitive areas such as marshes and low-water crossings and undeveloped land with low soil strength. With the GEOWEB system, roads are built with 50% less cross section of aggregate, even allowing use of locally-available fill, to support heavy vehicles with minimal environmental impact. Whether for maintenance vehicle access at substations...

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • ORC solutions for Power generation

    Providers and operators of engine power plants and mobile electrical supply systems can use our container solutions to efficiently turn engine exhaust gases and/or cooling water into clean electricity. Our containers work perfectly with diesel and gas engines, increasing electricity generation by up to 100 kilowatts per 1,400 kilowatts of generator power.

    By Orcan Energy AG based in Munich, GERMANY.

  • Aluminium-Air Technology for Electric Transportation

    Passenger cars can now run with zero emission while not compromising convenience. Phinergy powered cars offer a similar range to gas powered cars, and they only take five minutes to reload.

    By Phinergy based in Lod,, ISRAEL.

  • Gencell Solutions for Backup Power

    In its 2017 Infrastructure Report Card, the American Society of Civil Engineers assigned a “D+” to the US` aging energy infrastructure. Just a few weeks after the report was released, Los Angeles, New York and San Francisco were hit by major power outages on the same day. Mass transit was in chaos as the electrical outages caused the failure of signals and station lights. Office workers were stranded in elevators and hospital operating rooms were shut down. And businesses, factories, and homes went...

    By GenCell Ltd based in Petah Tikva, ISRAEL.

  • We Manufacture and Distribute Filters to the Energy Industry

    Maintain efficiency and protection with our wide range of filters which are designed to reduce manual cleaning and maintenance of your equipment. As a leading manufacturer and knowledge of the Power generation industry, we are able to offer solutions for all your filtration needs. We supply to both SME businesses and also to the world’s largest power generation corporations with our wide range of filters. Our products have been carefully engineered to ensure complete efficiency and functional integrity.

    By The Filter Company Group Ltd based in Sandiacre, UNITED KINGDOM.

  • Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. based in Westminster, MARYLAND (USA).

  • Process design & engineering services for power sector

    Each Power Plant is unique in its own way based on feed material, capacity and power output. Proxion Process provides services that are carefully tailored to meet a plant specification and requirement. From expert consultant services to technology to comprehensive project management, field service and technical support, Proxion Process offer comprehensive safe, reliable and cost-effective solution. Our aim is to improve plant availability, productivity and competitiveness.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Solar Lighting Technology for Power your Ideas

    The company now has representation in all states and consists of a strong and proactive management structure coupled with a skilled team of technical professionals who have expertise in both solar power energy and LED illumination systems. Leadsun is one of only few companies worldwide that fully develops and manufactures the complete solar powered system ensuring total control over product development, quality & testing. We are leading the way with solar-powered technology and the company has patents for its...

    By Leadsun Australia based in Dandenong South, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you