energy monitoring Applications

By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

For more information oplease visit the Google Play Store: https://play.google.com/store/apps/details?id=com.appsbar.ENMATEnergy415754&feature=nav_result#?t=W251bGwsMSwxLDMsImNvbS5hcHBzYmFyLkVOTUFURW5lcmd5NDE1NzU0Il0. Description Please Contact ENMAT on 0161 448 7722 for registration information. Free for business users with Half Hourly Metering. ENMAT provides affordable Energy Monitoring & Targeting software that helps companies to monitor and reduce Carbon Emissions. Our software can be used to set the targets you want to achieve at an affordable price. ENMAT Energy is for business use only.

By ENMAT Monitoring and Targeting - Envantage Ltd based in Manchester, UNITED KINGDOM.

The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in addition to the air temperature.

By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

Level transmitters and Level switches are used to monitor and control the geothermal water

By W.T. Maye, Inc. based in Knoxville, TENNESSEE (USA).

Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the globe.

By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

By Climatronics Corporation based in Bohemia, NEW YORK (USA).

Monitoring the impact of Hydropower plant activities on water bodies can be important for regulatory compliance and modeling purposes.

By The OTT Hydromet Group based in Kempten, GERMANY.

Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil analysis capabilities in house.

By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

By Nethix S.r.l. based in Castelfranco Veneto (TV), ITALY.

The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Nowadays, the new laws of protection and sustainability, increased energy prices and greater environmental awareness and drive increased largely rational use of energy, not only for end users but also large consumers and systems thereby improving efficiency in buildings.

By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

Discontinuous control is used mainly in smaller steam boilers with low output since the temperature fluctuations in the boiler are fairly great as a result of irregular refilling with water. Continuous control, on the other hand, permits still more economical steam generation with high quality.

By IGEMA GmbH based in Münster, GERMANY.

By HORIBA Europe GmbH based in Leichlingen, GERMANY.

Measurement of cold and hot water flows / BTU energy in residential buildings as well as large building complexes such as hospitals, schools, factories and offices to monitor and control usage.

By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

Hukseflux offers a complete range of instruments for applications in solar energy / PV system performance monitoring. Please visit our website to discover the possibilities and solutions for your industry. Whatever your application is, Hukseflux offers the highest measurement accuracy in every pyranometer class. The overview below, of SR20 pyranometer features and benefits, gives you some of the reasons why the best pyranometers are made by Hukseflux. Click the image to visit our website.

By Hukseflux Thermal Sensors B.V. based in Delft, NETHERLANDS.

Safe Training Systems (STS) are specialists in the provision of high quality, highly realistic simulated radiation monitors. STS have sold instruments for training to over 12 different countries across the world the majority of which have been used for Nuclear Worker training. The simulation system uses completely safe methods to recreate radiation fields and contaminated surfaces, this means that novice users can be taught basic principles without any exposure. There are of course also benefits to the trainer who again does not accumulate any dose and can therefore carry out more sessions. Instruments for workers vary widely from the Thermo Electra, RO2/20 and FH40G through to Ludlum model 3s and Automess 6150AD. With a wide range of instruments and sources there is always a solution to fit both budget and purpose - please contact sales@safetrainingsystems.com for more information.

By Safe Training Systems Ltd based in Wokingham, UNITED KINGDOM.

The battery charging is done through the solar panel connected to reduce the energy used from grid power and to save the electricity bills. It increases battery life because of ripple free charging from solar panel.Complete logging and monitoring of Solar (optional) The system monitors the solar energy generated from the panels and stores the cumulative KWH generated. Monitoring through communication

By Su-Kam Power Systems Ltd. based in Gurgaon, INDIA.

Several Spire Metering Technology flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Vehicle and Vessel Operation.

By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

Several Spire Metering flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Pharmaceutical & Semiconductor Applications.

By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).