Energy Project Applications

Energy Storage

The K&S Engineering company as a technology 'know-how' supplier has prepared algorithms for optimizing energy storage systems and developed a new simulation tool for it. Using this special simulation software, not only the major yield forecasts for the investors are done in detail, but it is also possible for the applied control algorithms to perform optimizations. With this, K&S offers a consultancy service combining photovoltaic-energy-storage-system design and the perfectly match of the upcoming control algorithms to be applied. As a supplementary service for investors and banks, K&S performs a technology and supplier evaluation in an technical risk assessment regarding the project. A first project with >30 MWp installed capacity in Japan with special requirements of the energy supplier and a nearly 20 MW battery power has already successfully been modeled by the K&S experts. For mor details please visit www.krugundschram.com

By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

Solar Energy Solutions

The promise of solar power is critically important to solving today’s energy demands in an environmentally sensitive way. Gratton develops, design, and delivers the most reliable and cost-effective solar energy solutions. We carry everything you need for your renewable energy project. As technology in the renewable energy industry is dynamic, we are constantly evaluating new products and manufacturers to offer the best package to the environmentally and energy conscious public. Solar system clearly makes environmental sense by producing non-polluting, free, renewable energy. Gratton solar solutions include utility-scale Commercial, Residential, Industrial, Public, and Special solutions to address contemporary energy needs.

By Gratton Arabia Ltd. based in Mississauga, ONTARIO (CANADA).

Multiparameter Monitoring for the Renewable Energy Industry

Site surveys for tidal, wave and wind based renewable energy projects will require instruments to measure standard physical parameters before, during and post installation.

Fine tuning of the generating method is also reliant on data from sensor packages to maximise the source energy required for profitable installations.

By Valeport Ltd based in Totnes, UNITED KINGDOM.

Utility-Scale Power Plants

As is the case in many countries, utility-scale power plants that produce renewable energy at the megawatt level are eligible to receive the Turkish government’s support via financial incentives. These power plants, whose operating costs are much lower than those of conventional power plants, can sell renewable power to electricity distribution companies at a government-guaranteed price over a fixed period of time. Companies or individuals can invest in and develop both licensed and unlicensed renewable energy projects to generate electricity. EkoRE offers investors all essential services to develop solar, wind and biogas power plants under one roof.

By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

Fly Ash Drying

In tune with industry trends, public scrutiny, government regulation, water constraints, etc., coal power plants here and abroad are striving to eliminate their ash ponds and replace them with dry solutions. If you are considering a transition from wet to dry ash handling, Vulcan® Systems can help. Vulcan® Fly Ash Drying Systems are custom-designed and manufactured to suit the customer's individual project needs.

By Vulcan Systems based in Moberly, MISSOURI (USA).

Biogas recovery

Collect valuable biogas from anaerobic digestion systems with a GTI gas collection cover. In waste-to-energy projects, the collected biogas can be used as a renewable fuel to generate process heat or electricity, helping to offset energy costs.

By Geomembrane Technologies, an Evoqua brand based in Fredericton, NEW BRUNSWICK (CANADA).

Agitation and mixing solutions for bio technology

The Biotechnology market is ever changing and on the leading edge of technology changes. New products are continuously under development and agitation and mixing is used throughout the process. A process may require any or a combination of the following: blending, solids handling including incorporation/dissolving/suspension, mass transfer, and solids and heat transfer. The scale for Biotechnology reactors and support units range from a few liters to several cubic meters and from small laboratory units to large scale fermenters. Biotechnology applications also require vendors who have strong R&D departments and laboratory facilities, polished and aseptic designs, easy drainability and cleanability designs, material validation, quality control programs specific to the project, and are able to meet governing specifications and directives such as FDA, USP, ASME-BPE, and cGMP requirements.

By National Oilwell Varco based in Dayton, OHIO (USA).

Production of Biofuels from Microalgae

Production of biofuels from certain microalgae and cyanobacteria would appear to be the most promising alternative to current methods, since its yield is very high, sustainable, uses either wastewater, brackish or seawater, does not require the use of agricultural land, does not compete with human food and the cultivation process consumes the CO₂noxious gas.

ALGAENERGY is responsibly paving the way towards making microalgal-based biofuels industrially profitable. The R&D projects assigned to this task include work on selection and genetic engineering of different microalgae to produce substantial lipid-carriers, some of them patented, as well as the establishment of a suitable and scalable production process.

By AlgaEnergy, S.A. based in Alcobendas, SPAIN.

Industrial and Commercial Solar

Many businesses today are faced with rising energy costs and declining competitiveness. These are some of the reasons why companies are adopting the sustainable and affordable solution of producing their own renewable energy, selling the surplus electricity back to the grid. In Turkey, businesses can install renewable energy systems with a capacity of up to 1 MW without a license, or can apply for a government license to install systems with capacities above 1 MW. Both licensed and unlicensed projects, located within specific electrical zones, can sell their surplus energy to the appropriate electricity distribution company. EkoRE provides a wide range of services for on-grid and off-grid solar, wind and biogas projects. Commercial solar energy applications: - Rooftop - Ground-mounted - Solar car parks

By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

Mexico customer bought 6 sets waste tyre pyrolysis plant in 2013

Mexico customer meeting for waste tyre pyrolysis plant In 2013, one customer from Mexico found us, after communicating with our project manager, this customer finally decided to buy 6 sets waste tyre pyrolysis plant, his machine finished installing and commissioning at August, and run well till now. Actually before cooperation with us, this customer already bought 2 sets from other suppliers, however he often meets problems when operating, till the end, machine can not operate normally. But this customer knows waste tire pyrolysis is absolutely a very good project, and has a bright future. So after careful consideration, customer decided to find new waste tyre pyrolysis plant supplier. Due to operating this machine before, this customer knows machine well, so this time, customer compared carefully, studied every component, even to very small unit. Finally he chose DOING as his cooperation partner, and bought 6 sets machine at one time. www.wastetireoil.com

By Henan DOING Renewable Energy Equipment Co.,ltd based in Zhengzhou, CHINA.

Process design & engineering services for power sector

Each Power Plant is unique in its own way based on feed material, capacity and power output. Proxion Process provides services that are carefully tailored to meet a plant specification and requirement. From expert consultant services to technology to comprehensive project management, field service and technical support, Proxion Process offer comprehensive safe, reliable and cost-effective solution. Our aim is to improve plant availability, productivity and competitiveness.

By Proxion Process based in Manchester, UNITED KINGDOM.

Add Supplier Profile