Energy storage in batteries or chemical fuels such as hydrogen or synthetic natural gas (produced through water electrolysis) will be crucial to the worldwide large scale deployment of fluctuating renewable energies.
Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.
The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for
Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.
Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.
For particulate matter (PM) emission control in high temperature exhaust streams, such as those from biomass or coal boilers and heaters, common dedusters such as cyclones and multicyclones are not able to comply with current emission limits. This is mainly due to their low efficiency, particularly for small particles (less than 10µm). In order to meet emission limits this usually requires an additional investment in a final stage deduster. Bag filters (BF) are very efficient dedusters. They can also be...
HydroThane BSP technology is the best method for H2S removal combining deep H2S removal, a very high reliability and availability, and low lifecycle costs. The clean biogas can be used to produce electricity or to replace natural gas in a boiler.
Providers and operators of engine power plants and mobile electrical supply systems can use our container solutions to efficiently turn engine exhaust gases and/or cooling water into clean electricity. Our containers work perfectly with diesel and gas engines, increasing electricity generation by up to 100 kilowatts per 1,400 kilowatts of generator power.
The construction of coal and natural gas power stations is continuing at a steady rate along with older power stations being retrofitted with more effective flue gas cleaning systems. Both the community and environmental protection authorities are paying closer attention to both emission and ambient concentrations around power stations.
Manufacturing TFT/LCD displays requires waste gas treatment as well. Processes that produce large scale Thinfilm Transistors (TFT) on glass substrates, for instance, use Chemical Vapour Deposition – CVD – to separate the thin films onto the material. The process requires cleaning the process chamber periodically and usually employs etching with NF3. Etching of the separated thin films typically utilises CF4, SF6 and chlorinated gases, which release large amounts of waste gas mixtures.
Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience...
Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.
During the many years that we have worked together with the companies in the precipitator frontline, we have had the possibility to gain experience how to develop and produce customer specified products for cleaning of combustion gas. We can give advice regarding design, dimension, and choice of material. We have modern and efficient machinery for production of emitting electrodes and bag cages. A thorough guidance of quality is a must to be able to meet the customer`s demand. Our resources and production enables...
This solution comprises a Biogas Digester of desired capacity working with specific substrate as input. It may or may not have H2S scrubbing system, depending on the quantity of H2S in the biogas and the requirement by the customer for cleaning it. As the heating value of biogas is almost half that of cooking LPG, specially designed biogas burners are provided to improve cooking speed. Depending on the demand by the customer, a blower to increase gas pressure may be employed.
The range of supply of biogas to electricity solutions is from 10 kW to 1 MW. All the components of the solution are provided with matching capacities.
It comprises the biogas digester system of the desired capacity, gas storage, biogas cleaning system to get rid of H2S from the gas, and the biogas genset. In the digester system, one may have a pre-digester or a feed mixing chamber or both. On the post-digester side, liquid from the slurry is separated and is recycled for feed preparation. It reduces the overall...