Only show results in Massachusetts? Ok

gas engine generator Applications

  • ORC solutions for Power generation

    Providers and operators of engine power plants and mobile electrical supply systems can use our container solutions to efficiently turn engine exhaust gases and/or cooling water into clean electricity. Our containers work perfectly with diesel and gas engines, increasing electricity generation by up to 100 kilowatts per 1,400 kilowatts of generator power.

    By Orcan Energy AG based in Munich, GERMANY.

  • Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Organic Rankine Cycle for Electricity from Heat Recovery

    Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Premium

    Centrifuges for edible fats, oils & biofuels

    Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    High-tech energy solution for the solar panel manufacturing industry

    The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun`s energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • diesel generator

    Place of Origin: Jiangsu, China (Mainland) Brand Name: Kaichen Model Number: KCC088 Output Type: AC Three Phase Speed: 1500rpm Frequency: 50HZ/60HZ, 50-60HZ Rated Power: 5KW-3500KW Rated Voltage: 400/230V Rated Current: 20A-8000A option: automatic transfe

  • Process design & engineering services for gas processing industry

    Proxion Process’ capabilities and experience in gas processing include gas dehydration, gas sweetening, sulfur recovery, NGL recovering and fractionation, natural gas liquefaction, and gas compression and reinjection. We can provide debottlenecking studies to increase throughput and decrease production schedules. Our personnel have experience in natural gas processing plants industry-wide.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Premium

    Industrial power solutions for the nuclear industry

    A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition,...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Oil separation and removal systems for Power generation plants industry

    In the power generation industry, petroleum-based products ranging from fuel oil and hydraulic fluid to lubricating greases and oils are found throughout every type of power generating plant or system. This includes coal-fired, gas-fired, hydroelectric, and nuclear.

    By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).

  • Multiple process fuels to make hot gas and thermal oil

    Particle board production requires huge amounts of hot gas at high temperatures for wood chips dryers. Besides generating heat for the main press, the thermal oil heater can generating hot water, steam or electricity (ORC application). VYNCKE offers a customized energy solution, burning a wide variety of process fuels and external fuels (all types of biomass).

    By VYNCKE based in Harelbeke, BELGIUM.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Recycling Systems for the engineered fuel, biomass / RDF

    Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero waste.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Corrosion-resistant materials for the power industry

    Sauereisen is the most widely known international company to supply corrosion-resistant coatings, mortars and gunitable refractory linings for flue gas applications in the power industry. For more than half a century, our cost-effective corrosion-resistant materials have provided solutions for power plants and their various components where the infrastructure would otherwise be threatened by corrosion. Our diverse product line includes potassium silicate, novolac epoxy, vinyl ester and urethane formulations...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you