Only show results in USA? Ok

gas engine power Applications

  • Premium

    Portable and fixed gas analysers for gas flaring

    Methane is a powerful greenhouse gas and should be destroyed before it enters the atmosphere. Flaring is a common solution for gas with CH4 10% - 40%.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • ORC solutions for Power generation

    Providers and operators of engine power plants and mobile electrical supply systems can use our container solutions to efficiently turn engine exhaust gases and/or cooling water into clean electricity. Our containers work perfectly with diesel and gas engines, increasing electricity generation by up to 100 kilowatts per 1,400 kilowatts of generator power.

    By Orcan Energy AG based in Munich, GERMANY.

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Industrial power solutions for the natural gas sector

    Cleaner burning than other fossil fuels, the combustion of natural gas produces negligible amounts of sulfur, mercury, and particulates. However, natural gas does produce nitrogen oxides (NOx), which contributes to smog.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Industrial power solutions for the nuclear industry

    A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition,...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Corrosion-resistant materials for the power industry

    Sauereisen is the most widely known international company to supply corrosion-resistant coatings, mortars and gunitable refractory linings for flue gas applications in the power industry. For more than half a century, our cost-effective corrosion-resistant materials have provided solutions for power plants and their various components where the infrastructure would otherwise be threatened by corrosion. Our diverse product line includes potassium silicate, novolac epoxy, vinyl ester and urethane formulations...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Organic Rankine Cycle for Electricity from Heat Recovery

    Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.

  • Premium

    High-tech energy solution for the solar panel manufacturing industry

    The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun`s energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    Centrifuges for edible fats, oils & biofuels

    Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Process design & engineering services for gas processing industry

    Proxion Process’ capabilities and experience in gas processing include gas dehydration, gas sweetening, sulfur recovery, NGL recovering and fractionation, natural gas liquefaction, and gas compression and reinjection. We can provide debottlenecking studies to increase throughput and decrease production schedules. Our personnel have experience in natural gas processing plants industry-wide.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Environmental monitoring solution for power plant

    The construction of coal and natural gas power stations is continuing at a steady rate along with older power stations being retrofitted with more effective flue gas cleaning systems. Both the community and environmental protection authorities are paying closer attention to both emission and ambient concentrations around power stations.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Process design & engineering services for power sector

    Each Power Plant is unique in its own way based on feed material, capacity and power output. Proxion Process provides services that are carefully tailored to meet a plant specification and requirement. From expert consultant services to technology to comprehensive project management, field service and technical support, Proxion Process offer comprehensive safe, reliable and cost-effective solution. Our aim is to improve plant availability, productivity and competitiveness.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Engineering services for marine power industry

    Energy Technology Centre provides versatile facilities for the engineering development of key elements of marine power systems including mechanisms, flow systems and individual components. Hydraulic power packs with a range of actuators allow sinusoidal and profiled time histories to be created for reproducing typical wave motion. Accelerated life cycle testing and the ability to undertake component qualification helps to de-risk deployment of complete systems offshore.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Electric power solution for oil-gas field sector

    The perfect solution of special industry of Yanan supports the safe and stable operation of the oil-gas field and others. The brand-new tandem and parallel operation function of the unit completely accords with the characteristics of power supply of oil-gas field, and in the rated power factor, it meets the stable and normal operation in the rated power range of 20%-100%. The normal operation of oil-gas field is strongly guaranteed by virtue of ultrastrong adaptability of complicated environment.

    By Fujian Fuan Mindong Yanan Electrical Co., Ltd. based in Ningde City, CHINA.

  • Turbine machines for power industry

    Our activities are closely interconnected with the energy industry. The precision casting foundry casts rotor and stator blades for gas turbines followed by precision grinding by the Industry Division. Furthermore, we also perform machining of shafts, complete blade attachment as well as subsequent assembly of steam and gas expansion turbines.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you