Only show results in Connecticut? Ok

gas turbine unit Applications

  • Organic Rankine Cycle for Electricity from Heat Recovery

    Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Turbine machines for power industry

    Our activities are closely interconnected with the energy industry. The precision casting foundry casts rotor and stator blades for gas turbines followed by precision grinding by the Industry Division. Furthermore, we also perform machining of shafts, complete blade attachment as well as subsequent assembly of steam and gas expansion turbines.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Measurement solution for carbon fibre manufacture

    Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Industrial power solutions for the nuclear industry

    A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition,...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Premium

    Portable and fixed gas analysers for gas flaring

    Methane is a powerful greenhouse gas and should be destroyed before it enters the atmosphere. Flaring is a common solution for gas with CH4 10% - 40%.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Electrochemical solutions and water technologies for renewable energy storage

    Energy storage in batteries or chemical fuels such as hydrogen or synthetic natural gas (produced through water electrolysis) will be crucial to the worldwide large scale deployment of fluctuating renewable energies.

  • Premium

    Portable and fixed gas analysers for biogas upgrading

    Biogas with 60% CH4 can be upgraded using various techniques. Upgraded biogas may be packaged for transport use, injected into a distribution network or piped off site.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Industrial monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Forgings - Turbine Shaft, Hydro Shaft, Rotor Shaft

    Large forgings for Energy Resource

    By Bortome Carbide | Tongyu Heavy Industry Group based in Qingdao, CHINA.

  • High-speed turbine machines for power engineering

    Traditions in the development, design and implementation of turbine and industrial boilers. Comprehensive service and equipment reconstruction.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • High-speed turbine machines for precision casting

    We cooperate with leading world manufacturers of turbochargers, combustion turbines, aviation components and insulation materials based on glass wool.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Solar Solutions for utilities and municipalities industry

    Utilities and municipalities can participate in the changing energy infrastructure. Energy infrastructure is changing. While oil, coal, and gas remain the dominant sources of global energy, heightened awareness to the social and economic benefits of renewable energy is resulting in increased demand for solar. 2016 was a record breaking year as the United States doubled its solar capacity from 2015. Total U.S. solar capacity is expected to triple over the next five years. Demand for solar is increasing and utilities...

    By Power Production Management, Inc. (PPM) based in Gainesville, FLORIDA (USA).

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • HydroQuest Hydrokinetic Turbines for clean energy in operation

    Why believe and investin hydrokinetic turbines? Whether designed to harness river currents or marine currents, HydroQuest hydrokinetic turbines deliver an effective energy solution for

    By HydroQuest SAS based in Meylan, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you