Only show results available in Virginia? Ok

heat and power Applications

  • Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. based in Westminster, MARYLAND (USA).

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Solar Energy for District Heating

    District heating is a growing industry and can supply an entire city with energy. District heating can also be produced on a small scale in smaller power plants, so-called local heating networks. Future energy prices are a big uncertainty factor for today’s energy producers, particularly as customers are becoming increasingly environmentally aware. Solar collectors that concentrate the sunlight provide a lot of advantages for the purchaser. Read more about our products and discover how you can profit from...

    By Absolicon Solar Collector AB based in Härnösand, SWEDEN.

  • Organic Rankine Cycle for Electricity from Heat Recovery

    Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.

  • Solar Energy for Apartment Buildings

    Providing heating, cooling and hot water for apartment buildings uses a lot of energy. Creating a sustainable residential environment in energy-efficient buildings is an important goal for the future. Rising energy prices are the driving force behind finding new solutions that allow buildings to become more self-sufficient in terms of energy. Solar collectors that concentrate the sunlight provide a lot of advantages for the purchaser. Read more about our products and discover how you can profit from using solar...

    By Absolicon Solar Collector AB based in Härnösand, SWEDEN.

  • Renewable energy products solutions for the solar enhanced oil recovery sector

    Steam enhanced oil recovery burns fossil fuel to generate steam to inject in production wells to boost oil output. CSP can be used to generate steam for this use. Hyperlight uses the lowest cost materials, manufacturing method, and installation technique of any CSP technology yet deployed for industrial process heat and can be deployed at the smaller scale needed for commercial and industrial customers.

    By Hyperlight Energy based in Lakeside, CALIFORNIA (USA).

  • DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Engineering services for thermal systems and biomass industry

    Comprehensive development and test facilities for a range of thermal power and heat transfer systems are available at Energy Technology Centre.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Non-Standard Applications

    Procal supply analysers to monitor many different applications from small combustion plants to large power stations. Examples include University Boiler Plants, Carbon Black Plants, Thermal Oxidisers and Community Heating Projects.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Renewable energy products solutions for the geothermal hybrid + storage sector

    Geothermal power plants use heat from production wells to drive turbines to make power. CSP augments the heat from the wells to boost power production. Hyperlight uses the lowest cost materials, manufacturing method, and installation technique of any CSP technology yet deployed for this purpose.

    By Hyperlight Energy based in Lakeside, CALIFORNIA (USA).

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric. Is it suitable for you? Local utilities feeding district heating Large sawmills Pellet manufacturing companies Manufacturers of MDF / OSB panels Greenhouses Wine industries

  • Wood Cogeneration for Farms

    Farming operations that require heat also benefit from the CHP system. The return on investment will vary dependent on whether there is low or no cost access to wood chips and whether the 45 kWh of power can be fully utilized on site or, if not, what rate the power can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Combustion measurement for engines

    Combustion processes occur in many modern technologies such as power production, heating, automotive and aircraft engines and even explosion research. The application areas range from fuel injection and mixing and flow velocity information to measurements of combustion species and soot concentration. Because of the impact on the global climate and the limited resources of fossil fuels, the importance of these applications is increasing, especially with respect to performance, fuel economy and CO2 emissions.

    By Dantec Dynamics based in Skovlunde, DENMARK.

  • Solutions for the food & beverages industry

    Food waste in general has a high energy density. This results in high yields when producing biogas through anaerobic treatment. Biogas is a very flexible energy product with proven capabilities in the power, transportation, and heat demanding sectors. In this sector, anaerobic digestion offers significant cost advantages over traditional disposal methods. By upgrading the biogas into natural gas using a DMT Environmental Technology system, a solid business case with an interesting return on investment is assured.

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • Energy from biogas and natural gas for agriculture

    You are a farmer and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

    By Wolf Power Systems GmbH based in Gorleben, GERMANY.

  • Energy from biogas and natural gas for the waste to energy industry

    You are a farmer/entrepreneur and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

    By Wolf Power Systems GmbH based in Gorleben, GERMANY.

  • Wood Cogeneration for Industry

    Any company that has a need for both heat and power is an ideal fit for the Borealis wood power system, especially if located in a rural setting where energy costs are high. The application requirement must be for the full 45 kWh of power for immediate use. If power requirement is not that high, then this energy can be sold to the regional power grid often at preferred rates. Options for off-grid solutions are being reviewed.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Cocoa shells making steam for bean processing

    Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power supply).

    By VYNCKE based in Harelbeke, BELGIUM.

  • CO2 neutral manufacturing of cars and trucks

    With large assembly halls to heat and very strict temperature- and humidity reqirements for their painting lines, car assembly facilities are big consumers of power and thermal energy. VYNCKE designs and builds reliable biomass energy solutions capable of not only delivering enough heat to keep assembly halls and offices warm but also guarrantee the required steadiness and accuracy in heat flow needed for the critical painting process. Hot water or superheated water is used to regulate the humidity and temperature...

    By VYNCKE based in Harelbeke, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you