Only show results in Texas? Ok

heat exchanger unit Applications

  • Premium

    Electrolysis technology for LNG terminals

    All lines can be blocked over in time by bacteria in the water that is used for heat exchange during liquefaction and gasification processes, in LNG Terminals. And this can lead to an increase in costs due to the inefficient heat exchange.

    By Kemisan Klor-Alkali A.S. based in Güzelbahçe/İzmir, TURKEY.

  • Premium

    UV fluorescence technology fo Monitoring of leaks in heat exchangers

    Optical instruments called fluorometers can very easily detect and measure dissolved petroleum hydrocarbons in water, and at very low concentrations. As shown in the study below, TD-4100 series monitors are able to measure xylene continuously over four consecutive weeks with a direct correlation coefficient of 0.9967 compared to GC grab sample analysis.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    UV fluorescence technology for Monitoring Heat Exchanger Leaks in Paper Plant

    Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was needed.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Organic Rankine Cycle for Electricity from Heat Recovery

    Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Multiple fuels in multi media energy plants

    MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

    By VYNCKE based in Harelbeke, BELGIUM.

  • Water Heating Systems for Aquaculture / Water Cooling Systems for Aquaculture

    Since 1988, Delta Hydronics has designed and installed numerous water heating and chilling solutions for life support systems using small equipment skid packages as well as large centralized mechanical systems for grow-out operations with mutiple heat exchangers and temperature requirements. Abalone farming Shrimp farming Tilapia farming Red Drum farming Trout farming Salmon farming Clams farming Many more When water temperature is critical for sustained growth and general health of commercial aquaculture...

    By Delta Hydronics based in Hudson, FLORIDA (USA).

  • Organic Rankine Cycle for electricity from heat collected by solar collectors

    Turboden units allow to convert the heat collected by solar collectors into electricity through an efficient thermodynamic cycle. Concentrating Solar Power systems with Turboden ORC can be cost-effective from 200 kW electric, depending on the irradiation of the installation site. Is it suitable for you? Concentrating solar collector field from 2 ha Hybrid CSP plants, e.g. solar+biomass

  • Agitation and mixing solutions for bio technology

    The Biotechnology market is ever changing and on the leading edge of technology changes. New products are continuously under development and agitation and mixing is used throughout the process. A process may require any or a combination of the following: blending, solids handling including incorporation/dissolving/suspension, mass transfer, and solids and heat transfer. The scale for Biotechnology reactors and support units range from a few liters to several cubic meters and from small laboratory units to...

    By National Oilwell Varco based in Dayton, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you