Our main products includes: Solar Cell Tester, Auto Solar Cell Tester, Solar ModuleTester, Auto Online Solar ModuleTester, Solar Module EL Tester, Auto Online Solar Module EL Tester, Solar Simulator and related test equipment.
The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in...
Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.
Usually, the performance of a PV module is measured at the factory under the so-called Standard Test Conditions (STC), described in IEC 60904. This is a convenient test method that can be integrated in routine production procedures. However, the indoor measurement of the STC PV performance reveals the power production of the module at only one particular measurement condition.
Solar Street Lighting,
The new Solar Street Lighting Systems available are state of the art and come with new and creative designs whilst maintaining the highest standards in manufacturing:-
Solar PV Tube Warranties,
Electronic Management Warranties,
Battery Manufacturers Warranties,
Solar PV Modules is vertically integrated within the Poles,
Monocrystalline Silicon Wafer PV Construction,
Solar Stand Alone Solutions,
7 Day Battery Back Up Power,
Full Communication between Solar lights and Service Centre,
based in Masdar City, UNITED ARAB EMIRATES.
Flisom’s lightweight, jet black and ultra-thin, flexible solar panels can be applied on roofs and facades. Besides supplying solar modules we work with global construction industry to shape the future of building integrated solar electricity. We offer two standard products for buildings, called eMetal and eFlex. Our lightweight eMetal solar panel can be installed on low-load bearing roofs without roof enforcement or in BIPV facade projects. Our flexible adhesive eFlex solar panel can be bonded on aluminium,...
Solar technology as a renewable energy technology is spreading around the world, with major manufacturing operations occurring in China, Germany, Spain, and the U.S. For solar photovoltaics, specialty chemicals are required for the production of the photovoltaic materials.
PV performance measurements under real outdoor conditions are done in may different ways. However, the concept of all performance investigations is to relate the input energy, which is the solar radiative flux, to the output energy, which is the electrical power produced by the PV module. EKO’s Solar Monitoring Stations, referred to as SMS, is the dedicated facility for this type of evaluation.
SolarReserve’s industry-leading solar thermal technology features an integrated molten salt energy storage system that provides a stable and predictable electricity dispatch similar to that of conventional utility power facilities—without any associated harmful environmental emissions or volatile fuel costs. Additionally, our solar thermal power plants with integrated energy storage are cost-competitive with most new build fossil fuel or nuclear technology.
Our rollable and flexible solar panels power innovative solar applications. In case our standard products cannot match a requirement, we offer our development, testing and manufacturing expertise to customize solar panels & films for special applications. Our proprietary laser patterning technology allows us to adapt the shape and electrical output of a module to customer requirements, while our manufacturing process allows us to encapsulate the solar foil in different materials to achieve flexible and...
Solar panels for lighting is a good option for standard lighting products to become power efficient and fully or semi autonomous lighting product. With Metsolar custom made solar panels, any lighting product can be integrated with solar energy – from street pole, park and walkway lights to residential area lighting solution. We work together with manufacturers of street poles, lighting designers and architects to provide optimal working both design and technical solutions from residential to public spaces...
10HP Solar Thermal Steam Generator produces 300#s of 15PSI Steam per hour at 250F. Integrates into any main steam line. Cost effective and perfect for significant reductions in GHG. ROI can be less than 5-years
The automotive industry increasingly demands green solutions for emission reduction, better economics and extended e-mobility drive ranges. Other companies that continue to push the limits of sky and space require advanced solar energy solutions. Flisom’s solar films are lightweight, flexible, thin, reliable and easy to integrate into many mobility applications. We work with global companies, leaders of the automotive industry and aerospace contractors for shaping the future of mobility.
In 2012, GP JOULE developed the power gap filler system to compensate for load fluctuations in the grid resulting from variations in the supply of wind and solar energy. PEM electrolysers convert excess green energy into hydrogen, which can be stored and fed back into the grid as required via a biogas-fired block-type thermal power station. This makes it possible to optimally integrate renewable energies into the electrical grid and offset and compensate for a lack of energy on days when there is little wind or...