Only show results available in Connecticut? Ok

offshore wind energy Applications

  • Wind monitoring for the offshore wind energy

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Engineering services for wind energy industry

    We offer expertise in the wind industry with experience at all scales of wind energy from micro turbines to offshore systems. As active members of the industry, we are represented on RenewableUK Standards Groups, IEC technical working groups and MCS working groups, developing standards and certification requirements for the industry.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • LIMPET Offshore Personnel Transfer System

    Limpet Technology is embarking on the development of a new access solution that focuses on allowing technicians and loads to transfer between vessels and offshore wind turbines more safely and in higher sea states. The overarching technical objective is to deliver a solution that can be proven to deliver safe and reliable access to and from offshore wind turbines in sea states up to and beyond 2.5 metres Significant Height (Hs).

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Unmanned surface vehicle solutions for offshore wind farm

    The use of a USV can assist in surveying a wind farm to obtain sufficient and reliable information on the nature of the seabed to permit a safe and economic design, the installation and maintenance, which helps developers achieve minimum investments and the highest efficiency.

    By OceanAlpha Group Ltd. based in Wan Chai, CHINA.

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By OTT HydroMet based in Kempten, GERMANY.

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Wind monitoring for the wind energy industry

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Bristol Industrial & Research Associates Ltd (BIRAL) based in Portishead, UNITED KINGDOM.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines....

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Limpet Wind Energy Solutions

    We are working with major turbine OEMs, energy utilities and technical service specialists to reduce operations and maintenance costs and increase availability of wind turbines through the deployment of Limpet safety systems. Key applications for Limpet® systems include:

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Glass Fabrics for Wind Energy

    STEKLONiT offers solutions for wind energy, one of the most promising sectors of electric-power industry. Thanks to inherent high quality, physical-mechanical properties, light weight, STEKLONiT’s glass fabrics are used in manufacture blades and tubes of wind power generators. Products can be manufactured according to a customer`s requirements and delivered to any place in the world.

    By Steklonit JSC based in Moscow, RUSSIA.

  • Premium

    Restricting Birds and Wildlife -

    Prevent birds and wildlife from entering dangerous areas, as well as preventing mess and liabilities from animal mess. Bird-X products reduce and eliminate birds and wildlife from entering unwanted or dangerous areas for the good of all parties involved. Birds and animals are not harmed by Bird-X products - which are designed to make areas uncomfortable and unwelcoming to animals, forcing them to go elsewhere. Bird-X products have been developed since 1964, hold an excellent BBB rating, and we offer GSA Advantage....

    By Bird-X Inc. based in Chicago, ILLINOIS (USA).

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • Fabrication solutions for the wind energy industry

    Modern wind turbines include a variety of components from BRÜCK. Our products are found in the power transmission in the form of bearings, flanges, gear and generator parts as well as in the pitch and gondola housing. Due to our vast depth in manufacturing and the enormous production capacity, we can cover the usual in the wind power industry requirements and high demands in the situation. Many global players in the wind energy sector benefit from BRÜCK proposed solutions for structural design of...

    By BRÜCK GmbH based in Saarbrücken-Ensheim, GERMANY.

  • Environmental solutions for the wind energy industry

    Presto delivers economical and low maintenance options for stable gravel roads and staging areas with the GEOWEB and GEOTERRA load support systems. GEOWEB-confined gravel roads and pads are stronger and more stable using 50% less gravel or sand, and allow access across soft ground and low-lying areas. GEOTERRA construction mats support heavy loading without aggregate infill, yet require no specialized equipment. They are fast to deploy and safe to install for temporary access—and easy to remove after use...

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Wind farm noise monitoring

    Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind farm&rsquo...

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • Hydrogen solutions for wind energy conversion sector

    H-TEC SYSTEMS delivers its ME 100/350 PEM electrolyser for first customer practical application: The Citizen wind park Ellhöft (Bürgerwindpark Ellhöft) will use it to convert wind energy into green hydrogen and sell it to the transport sector. By drying the generated hydrogen, H-TEC makes it usable as a fuel according to ISO 14687. A new hydrogen refueling station west of Flensburg will sell it as fuel. It is planned to have the electrolyser installed and up and running by the spring of 2019. The...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • Sonic detection and ranging technology solution for wind energy industry

    Wind Energy has brought new life to the wind measurement industry, including SoDAR. With wind turbine hub heights reaching over 100m and blade spans of up to 80m, measurements across the entire blade swept area are becoming critical. SoDAR provides that information and ASC`s SoDARs offer more.

  • Wind power solutions for the microgrids sector

    Microgrids state-of-the-art wind power with integrated storage and full controllability for the smartest of grids.

    By XANT NV based in Brussels, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you