Only show results in Texas? Ok

on-site energy Applications

  • Premium

    Portable and fixed gas analysers for biogas upgrading

    Biogas with 60% CH4 can be upgraded using various techniques. Upgraded biogas may be packaged for transport use, injected into a distribution network or piped off site.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Marine envrionmental solutions for renewable energy industry

    Fugro EMU Limited is a specialist in renewable energy and has been involved in assisting clients in their site selection process for R2, Scottish Territorial Waters and R3 developments. In the initial site selection process, Fugro EMU will broadly highlight the environmental, socio-economic and technical issues of a given site through a combination of short term consultation, desk based studies and expert knowledge thereby allowing the client to make a site selection based on accepted scientific fact. Once a site...

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Fly Ash Disposal Cover

    LSC has two distinct products that address the unique challenges common to fly ash monofills. For sites interested in long-term solutions for dust, leaching, and erosion, Posi-Shell Environmental Coatings deliver a nearly impenetrable cover that lasts for years. For sites only interested in dust control, our all-natural and biodegradable product, Posi-Clear, reduces fugitive dust by bonding surface fines into a long lasting cohesive layer. Posi-Clear is not a chloride or a P.A.M. which makes it environmentally...

    By LSC Environmental Products, LLC based in Apalachin, NEW YORK (USA).

  • Wind power solutions for the off-grid systems sector

    Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

    By XANT NV based in Brussels, BELGIUM.

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Bristol Industrial & Research Associates Ltd (BIRAL) based in Portishead, UNITED KINGDOM.

  • Multiparameter Monitoring for the Renewable Energy Industry

    Site surveys for tidal, wave and wind based renewable energy projects will require instruments to measure standard physical parameters before, during and post installation.Fine tuning of the generating method is also reliant on data from sensor packages to maximise the source energy required for profitable installations.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Premium

    Machine condition monitoring for biofuels

    Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Meteorological Monitoring for Optimizing Solar Power Generation Efficiency

    Weather data is critical to optimizing the efficiency of solar power generation. Beginning with site assessment, on-site meteorological monitoring factors into overall project performance and ROI. Weather stations provide reliable information on parameter

    By Columbia Weather Systems, Inc. based in Hillsboro, OREGON (USA).

  • Environmental solutions for the wind energy industry

    Presto delivers economical and low maintenance options for stable gravel roads and staging areas with the GEOWEB and GEOTERRA load support systems. GEOWEB-confined gravel roads and pads are stronger and more stable using 50% less gravel or sand, and allow access across soft ground and low-lying areas. GEOTERRA construction mats support heavy loading without aggregate infill, yet require no specialized equipment. They are fast to deploy and safe to install for temporary access—and easy to remove after use...

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Instruments and analyzers for PV site solar monitoring

    PV performance measurements under real outdoor conditions are done in may different ways. However, the concept of all performance investigations is to relate the input energy, which is the solar radiative flux, to the output energy, which is the electrical power produced by the PV module. EKO’s Solar Monitoring Stations, referred to as SMS, is the dedicated facility for this type of evaluation.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Modular Barrier System for Nuclear Applications

    The MRP Modular Barrier System has been extensively used at nuclear power stations and decommissioning sites. In the UK the MRP Barrier has been used at a number of nuclear sites to provide shielded storage areas for waste in drums and ISO containers; temporary walls during maintenance operations and refurbishment of cell windows. The MRP Shield has been deployed at Hunterston, Sizewell, Berkeley, Oldbury and Hinkley power stations and at Sellafield and Dounreay.

    By MRP Systems Limited based in Preston, UNITED KINGDOM.

  • Thermal structures insulation for power generation industry

    Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation requires.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Offering localized atmospheric and solar radiation output in order to model & manage energy use for energy sector

    Energy providers, engineers, universities and labs use Weather Analytics’ localized atmospheric and solar radiation output in order to model and manage energy use and consumption within buildings and profile new renewable-energy sites. Weather Analytics provides solution-ready, statistically stable climate data, including hard-to-find variables. We provide global geographic coverage and easy access to comprehensive climate intelligence, including on demand Typical Meteorological Year (TMY) and Actual Meteorological...

    By Weather Analytics based in Bethesda, MARYLAND (USA).

  • Data loggers and data acquisition monitoring solutions for the alternative energy sector

    Best selection of alternative energy data loggers. Industrial, portable, remote, waterproof models with mixed-inputs and multi-channels. From simple applications up to monitoring large commercial PV arrays. Rental available. Alternative energy data loggers are suitable all applications. Simple data loggers that can be used to monitor wind speed for site surveys to complete systems that are used to monitor large commercial PV arrays are available.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Wastewater treatment solutions for biogas and biofuel

    Combining industrial performance and sustainable development while remaining competitive requires that the biogas and biofuels industry ensure industrial process safety, reduceoperational costs, implement solutions providing significant savings and comply with environmental regulations, which ultimately lead to the public’s acceptance of a site.

    By IDRAFLOT based in Zoppola, ITALY.

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Evaporation technology for biogas and biofuels industries

    Combining industrial performance and sustainable development while remaining competitive requires that the biofuels and biogas industry ensure industrial process safety, reduce operational costs, implement solutions providing significant savings and comply with environmental regulations, which ultimately lead to the public’s acceptance of a site.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Data analysis and visualization tools for dams & hydropower

    The U.S. Geological Survey and organizations around the world like BC Hydro of Canada and Mighty River Power in Australia use C Tech’s technology to model the geology and hydrology associated with dams and new hydropower sites.

    By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

  • Instruments and analyzers for measurement of engergy losses in building

    The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location) and building construction (Material). On site measurements are possible with EKO thin film heat flow sensors which can be integrated with building walls. Evaluation of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you