Only show results in USA? Ok

photovoltaic system performance Applications

  • Premium

    High-tech energy solution for the solar panel manufacturing industry

    The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun`s energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • K&S performs Solarpark supervision in Japan to secure high quality standards

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible...

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Supervision of Photovoltaic Power Plants in Japan

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible...

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Evaporation technology for photovoltaic & microelectronics industries

    The manufacturing process of the cells that make up the photovoltaic systems and the printed circuits require water in quantity and high quality. This water has to be managed wisely so as not to affect the productivity and the expenses of the plant.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Energy Storage

    The K&S Engineering company as a technology 'know-how' supplier has prepared algorithms for optimizing energy storage systems and developed a new simulation tool for it. Using this special simulation software, not only the major yield forecasts for the investors are done in detail, but it is also possible for the applied control algorithms to perform optimizations. With this, K&S offers a consultancy service combining photovoltaic-energy-storage-system design and the perfectly match of the upcoming control...

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Premium

    Meteorological sensors for solar monitoring industry

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    High quality gas sensor solutions for biogas

    Fast, accurate and reliable measurement of CO2 and CH4 concentration. Methane and CO2 concentration measurements are a key part of the evaluation of the anaerobic digestion process. Too high or too low gas concentration levels can indicate a change in the efficiency of the fermentation process. AD process control systems measure the Methane content (and often the CO2 content) of the gas stream to control or evaluate the AD process and warn of problems. Edinburgh Sensors provide high performance OEM gas detectors...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Energy storage solution for solar self consumption sector

    In markets with high electricity rates, such as e.g. Germany, Hawaii or Australia, it can be economical to deploy energy storage systems to store the generated photovoltaic (PV) production for usage in the evening hours. As a grid tied PCS, Eguana`s products can seamlessly charge and discharge the battery, deliver power to the grid and supply critical loads. Unlike other battery inverters, Eguana`s PCS can supply the base loads continuously from the battery system, even during peak consumption times, while...

    By Eguana Technologies based in Calgary, ALBERTA (CANADA).

  • TESTS ON THE FIELD FOR PV PLANTS

    There is no legislation to control of the proper functioning of pyranometers used to measure solar radiation installed in the PV field. The control can be effectively carried out with portable instruments suitable to avoid uninstalling pyranometers set in areas normally inaccessible as placed at the side of panels. A quick test on the field assesses whether a good maintenance is sufficient to obtain a reliable measurement of the solar radiation or if it is necessary to send radiation sensors to the manufacturer...

    By Delta OHM - member of the GHM GROUP based in Caselle di Selvazzano, ITALY.

  • Waste gas & wastewater treatment for the solar industry

    Generating solar energy is considered `green technology`, even though the production of solar cells based on silicon predominantly uses process stages that have been common practice in the semiconductor industry for many years. As in the semiconductor industry the production of solar cells employs dangerous and environmentally harmful substances, which require abatement according to legal provisions. The production of photovoltaic cells therefore is subject to strict requirements for treatment of waste gases and...

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Adhesive technology solution for renewable energies industry

    The debate around the phase-out of nuclear power has highlighted it once again: there`s no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or...

    By Lohmann GmbH & Co.KG based in Hebron, KENTUCKY (USA).

  • Electric power solution for Financial industry

    The stable and reliable power supply system of Yanan completely meets the continuous and stable operation requirement of the large batch of electronic equipment in the financial industry; and Yanan is the good win-win cooperation partner in the financial industry. The unique redundancy protection eliminates the worries of the financial electric power supply thoroughly. With the ultrastable performance, perfect ATS function, low noise, low exhaust gas emission, anti-interference, instant start and other advantages,...

    By Fujian Fuan Mindong Yanan Electrical Co., Ltd. based in Ningde City, CHINA.

  • Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you