Only show results in Virginia? Ok

power generation Applications

  • Premium

    Actuators for the power generation

    As well as traditional power stations, applications for Rotork products are found on renewable energy generation such as solar thermal plants and on CO2 emissions reduction processes such as flue gas desulphurisation and carbon capture and storage.

    By Rotork based in Bath, UNITED KINGDOM.

  • Pumping solutions for power generating

    Fluids Handled - Lubricating oils, Fuel Oil, Fuel Flow Dividers.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Spill control for power generation

    By Antech Hydraulics Ltd based in Poulton-Le-Fylde, UNITED KINGDOM.

  • Premium

    Power Generation

    MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Industrial vacuuming for power generating plants

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    Machine condition monitoring for power generation

    Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil analysis capabilities in house.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. based in Westminster, MARYLAND (USA).

  • Water treatment research for power generation sector

    The power generation sector is the largest industrial user of water in the world, with a need for enormous volumes of water for cooling and ultrapure water to supply boiler systems. Investment in water treatment technologies for this sector is worth $2.1 billion. Rapid industrialisation and economic growth in South East Asia and Sub-Saharan Africa is increasing demand for electricity, requiring significant investment in water technologies. Environmental regulation will push for increased treatment of scrubber wastewater and solutions to reduce the burden that cooling places on the local environment.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for shaft work comes out in the exhaust gases, so these have either a high temperature or a high velocity. A catalyst is often used to treat these exhaust gases to comply with emissions regulations. EmeraChem has installed OEM and after-market catalyst in over 240 applications

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Premium

    Piping & ducting solutions for the power generation industry

    The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Thermal structures insulation for power generation industry

    Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation requires.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Gas Detection Solutions for Power Generation Industry

    Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Solar Powered Home UPS

    The battery charging is done through the solar panel connected to reduce the energy used from grid power and to save the electricity bills. It increases battery life because of ripple free charging from solar panel.Complete logging and monitoring of Solar (optional) The system monitors the solar energy generated from the panels and stores the cumulative KWH generated. Monitoring through communication

    By Su-Kam Power Systems Ltd. based in Gurgaon, INDIA.

  • Power Piping Solutions

    ISCO Industries offers solutions for various power piping applications in nuclear, fossil and renewable generation facilities. Whatever your power needs, ISCO Industries supplies pipe, fittings, fabricated fittings, related piping products and more.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Premium

    Ice blasting technology for nuclear

    Applications of Coulson ice Blast in the Nuclear industry sector:

    (Please note that D2O can be used to make the ice thus not downgrading the D2O systems)

    Ice

    • General decontamination activities where hand washing is not satisfactory
    • Decontaminate tools / objects
    • Decontaminate Waste storage containers
    • Shut down maintenance cleaning
    • Decontamination of Steam Generator Heads prior to maintenance
    • Decontamination of fuel handling equipment
    • Decontamination of D2O storage drums
    • Decontamination of active storage cells

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Utility-Scale Power Plants

    As is the case in many countries, utility-scale power plants that produce renewable energy at the megawatt level are eligible to receive the Turkish government’s support via financial incentives. These power plants, whose operating costs are much lower than those of conventional power plants, can sell renewable power to electricity distribution companies at a government-guaranteed price over a fixed period of time. Companies or individuals can invest in and develop both licensed and unlicensed renewable energy projects to generate electricity. EkoRE offers investors all essential services to develop solar, wind and biogas power plants under one roof.

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • Nuclear/District Survey or Environmental LIMS

    The Matrix LIMS Nuclear Monitoring Solution is a versatile, comprehensive LIMS solution that is available for district survey, liquid discharge, gaseous discharge and chemistry applications. It is a highly configurable software system, suitable for environmental and chemistry applications within the nuclear power generation industry. It applies to both generating stations and during decommissioning. Access to the system is controlled by a comprehensive security system utilising a class based structure relating to job function and / or authority.

    By Autoscribe Informatics based in Reading,, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you