Only show results in Virginia? Ok

slop-oil Applications

  • Oil absorption

    By ESP, Environmental Service Products based in Rockledge, FLORIDA (USA).

  • Transformer oil purification

    By Ecofix Pty Ltd. based in Sydney, AUSTRALIA.

  • Premium

    Flow & Energy Management Solutions for oil and petrochemical

    Crude oil (after first stage separator), offloading of crude oil, water injection or refined petroleum. EF10-C clamp-on,non-intrusive ultrasonic flowmeter for easy installation. The enclosure is IP65 (NEMA 4X) wall-mount type. Class 1 Div 2 version can be offerred upon request.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Measurement of oil content of oil bearing algae used for biofuel production

    We assist the rapidly growing global biofuels industry through our MQC analysers, speeding up analyses by up to 250 times, and dispensing with the need for hazardous solvents and skilled operators required for traditional methods such as soxhlet extraction and chromatography. Benchtop, non-destructive single seed analysers enable seed breeders to select the highest oil bearing single seeds, accelerating the breeding of high oil bearing seeds for biofuel purposes by up to five years. Typical seeds are Jatropha and Camelina; our breadth of applications capability allows almost all seeds to be characterised. Benchtop seed analysers allow seed co-operatives and biofuel crushers/processors rapidly and accurately to measure the oil and moisture content of biofuel seeds. This enables farmers to be paid according to oil content, and crushing/oil processing to be optimised for the oil and moisture content to achieve the highest quality biofuel output.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Waste tyre to oil recycling process pyrolysis plant

    Waste tyre to oil recycling process pyrolysis plant the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant. You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution. Waste tyre to oil recycling process pyrolysis plant advantages: 1. One week installation:no need to build foundation thus shorten the construction period, 4th and 5th machine installation period is one month, 6th machine install only need one week. Also easy to move. 2. Service life: Special design inside the reactor to avoid direct heating, so machine service life prolong to 3-5 times and the heating energy can realize 100% utilization. Contact: Ms Bonnie Phone: +86-371-5677 1821 +86 15893800169 Skype: bonniezhao2 Email: oilmachine@doinggroup.com www.wastetireoil.com www.doinggroup.com

  • Pumping solutions for fuel (waste)

    Fluids Handled - Petroleum Refining, Blending and Transporting.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Pyrolysis oil to diesel

    Pyrolysis oil to diesel continuous waste pyrolysis oil to diesel Solution: Oil refining machine Applicable: Tire oil, Plastic oil, Waste oil, Pyrolysis oil,Engine oil, Black oil, Heavy oil, etc Output: 85-90% good clean oil, the rest is slag and waste gas Heating fuel: Coal / wood/ fuel oil / gas Oil refining machine land size: 20X15m Reactor material:Q245/ Q345 Boiler plate

  • Solutions for the chemicals & oil industry

    From exploration to extraction, we`re leading the field with technological development of the industry and the discovery of new sources.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Transformer Oil Purification

    Transformer Oil Purification helps to extend the lifetime of transformer oil as it prevents the deterioration of the transformers' insulating fluids. Deterioration is mainly due to contamination, overheating, electrical stress, and oxidation. There are two main mechanisms occurring in the transformer oil during operation which cause deterioration: moisture contamination and oxidation. Both are fought with the help of transformer oil purifying and transformer oil regeneration systems.

    By Hering-VPT GmbH based in Dinkelsbühl, GERMANY.

  • Recycling waste oil into a resuable fuel for waste & recycling industry

    With the increasing requirement to reduce or recycle products, used lubricating oils obtained from automobiles, large plant equipment, generators etc. are collected and sent to a facility to recycle the waste oil product into a reusable fuel. This fuel can be used by power stations and other facilities to reduce their usage of original and more expensive fossil fuel.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and measurement results take less than one minute.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Aquatech Water Management Solutions for Unconventional Gas

    Managing produced water from shale gas wells is challenging and requires a variety of solutions & services. Aquatech offers mobile and/or central facility solutions that provide customers to suit their needs. The demands of field operations on equipment and personnel require a high level of continued dedication, experience, & engineering. Aquatech delivers reliability on all of these fronts to ensure that water management & treatment enable gas production to proceed rapidly and efficiently. Our solutions ensure a consistent water composition, with minimal contamination. This enables predictable production characteristics such as consistent hydro fracturing and minimal down-hole scaling. Most import, Aquatech offers sustainable solutions that are friendly to the environment and to the gas producer. The industry needs treatment standards to exceed current and future regulatory requirements. Our commitment to sustainability sets a standard way beyond what many believe is possible today.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Continuous process waste tyre to oil recycling

    Solution: Continuous pyrolysis plant Function: Recycling waste tire to fuel oil Applicable raw material: Car tire, Truck tires, OTR tries, etc Output: 45-52% crude oil, 30% carbon black,12-15%steel wire, 8% waste gas Heating fuel: Coal / wood / fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/Q345 Boiler plate

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you