Only show results in USA? Ok

solar photovoltaic power plant Applications

  • Premium

    High-tech energy solution for the solar panel manufacturing industry

    The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun`s energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Photovoltaic power solutions for the Solar Case sector

    Photovoltaic power solutions for the Solar Case sector.

    By Anhui Leiton Electric Technology Co., Ltd. based in Hefei, CHINA.

  • Photovoltaic Plant Monitoring

    By Nethix S.r.l. based in Castelfranco Veneto (TV), ITALY.

  • Premium

    Chemical Analyzing in Photovoltaics for the Solar Power Industry

    In the earlier days, the chemistry involved in solar cell manufacturing was relatively simple, using commodity chemicals. With cell efficiencies continuously on the rise and new cell concepts slowly being introduced with increased speed of processing, precise chemical concentration control is becoming crucial to obtain consistency and more cost-effective manufacturing of solar panels. This is possible by monitoring on-line the etching bath composition, a small but genuine step forward in your competitive advantage....

    By AppliTek NV based in Nazareth, BELGIUM.

  • Integrated real-time gas analysis solution for solar PV industry

    Solar technology as a renewable energy technology is spreading around the world, with major manufacturing operations occurring in China, Germany, Spain, and the U.S. For solar photovoltaics, specialty chemicals are required for the production of the photovoltaic materials.

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Evaporation technology for photovoltaic & microelectronics industries

    The manufacturing process of the cells that make up the photovoltaic systems and the printed circuits require water in quantity and high quality. This water has to be managed wisely so as not to affect the productivity and the expenses of the plant.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Solutions for solar, energy & environment sector

    When it comes to energy production and protecting the environment, going down new paths is more critical than ever before. We do just that. SCHOTT Solar has more than 50 years of experience in solar technology and combines expert knowledge in receiver technology for solar power plants with parabolic trough technology and photovoltaics under one roof. Welcome to the future.

    By SCHOTT AG / SCHOTT Solar CSP GmbH based in Mainz, GERMANY.

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Metrology for the photovoltaics industry

    Quality control to maximize efficiency is critical in the competitive photovoltaic industry. For some time solar texture has been thought to qualitatively affect solar cell efficiency. However, through large-area, 3D measurements and areal feature parameters, quantitative correlation of texture to efficiency has only recently been obtained. We now know that ISO 3D surface parameters linearly correlate with solar cell efficiency.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Solar Energy for Power Plants

    Regardless of whether a power plant runs on coal or natural gas, it has a very large environmental impact. Producing and transporting fuel also requires consuming resources and generating emissions. Stricter environmental requirements and increased energy costs are challenges for the industry. Solar energy can be used to preheat the water, the make-up water and the actual steam process. Solar collectors that concentrate the sunlight provide a lot of advantages for the purchaser. Read more about our products and...

    By Absolicon Solar Collector AB based in Härnösand, SWEDEN.

  • Thin Film Photovoltaic Applications

    Silver-filled, electrically conductive epoxy adhesives are used to bond coated copper ribbon on rigid and flexible substrates such as glass or stainless steel foil. Adhesives are well suited for highly reliable bonds to most TCO´s, low-temperature silver pastes, and metallic contact surfaces such as Mo, NiV, or Ag. Because of the miniscule amounts of SoltaBond adhesive needed in automated high-speed production processes, total costs are kept low. Most Thin Film PV companies in the world, that are use...

    By SoltaBond GmbH based in Karlsbad, GERMANY.

  • Supervision of Photovoltaic Power Plants in Japan

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible...

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Renewable energy solutions for the saving energy industry

    Frequency inverter reconstruction of Power Plant promoted heightening of economy benefit. Frequency inverter won acceptance of user as its high reliability, flexible adjustment and simple operation. A Power Plant was set up in June, 2000. Its predecessor was one of key plants of state. The plant put into service in 1957. Now it has 4×50MW, 2×142MW, total ten boilers and six generators. Total capacity is 484MW. The plant supplies power to big enterprise near to it.

    By Shenzhen Veikong Electric Co.,Ltd based in Shenzhen, CHINA.

  • TESTS ON THE FIELD FOR PV PLANTS

    There is no legislation to control of the proper functioning of pyranometers used to measure solar radiation installed in the PV field. The control can be effectively carried out with portable instruments suitable to avoid uninstalling pyranometers set in areas normally inaccessible as placed at the side of panels. A quick test on the field assesses whether a good maintenance is sufficient to obtain a reliable measurement of the solar radiation or if it is necessary to send radiation sensors to the manufacturer...

    By Delta OHM - member of the GHM GROUP based in Caselle di Selvazzano, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you