steam boiler generator Applications

Discontinuous control is used mainly in smaller steam boilers with low output since the temperature fluctuations in the boiler are fairly great as a result of irregular refilling with water. Continuous control, on the other hand, permits still more economical steam generation with high quality.

By IGEMA GmbH based in Münster, GERMANY.

Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition,...

By CECO Environmental based in Dallas, TEXAS (USA).

For many years, sugar mills have burned bagasse, the fibrous byproduct of the processing of sugarcane, using special boilers that produce the steam needed to help break down the sugar cane. As the cost of powering this equipment by burning fossil fuels has steadily risen, the use of biofuel cogeneration as a source of power production has become more prevalent. Many sugar mills have updated their bagasse-fired boilers and linked them to generators that produce electricity used to power the mill’s operations...

By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

Combustion efficiency is a measurement of how well any given fuel is being burned and converted into useful energy (e.g.: heat, hot water, steam). The calculations are based on 3 MAJOR Factors:

By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

10HP Solar Thermal Steam Generator produces 300#s of 15PSI Steam per hour at 250F. Integrates into any main steam line. Cost effective and perfect for significant reductions in GHG. ROI can be less than 5-years

By Artic Solar, Inc based in JACKSONVILLE, FLORIDA (USA).

You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

By TerraSource Global based in St. Louis, MISSOURI (USA).

Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power supply).

By VYNCKE based in Harelbeke, BELGIUM.

MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

By VYNCKE based in Harelbeke, BELGIUM.

Steam enhanced oil recovery burns fossil fuel to generate steam to inject in production wells to boost oil output. CSP can be used to generate steam for this use. Hyperlight uses the lowest cost materials, manufacturing method, and installation technique of any CSP technology yet deployed for industrial process heat and can be deployed at the smaller scale needed for commercial and industrial customers.

By Hyperlight Energy based in Lakeside, CALIFORNIA (USA).

For vacuum generation during the polycondensation process specially developed glycol steam jet vacuum systems are used.

By Körting Hannover AG based in Hannover, GERMANY.

The use of coal for power generation is widely common. Temperature monitoring is essential for improving the safety and combustion process efficiency. Temperature monitoring in the boiler is important to oversee boiler performance and optimise the combustion process. Key temperature measurements help to prevent damages on the refractory and optimise the combustion process. VisionTIR provides different solutions for an early detection of fire and to optimize your boiler operation.

By VisionTIR based in Malaga, SPAIN.

Superior Boiler Works, Inc. led the way in Ethanol production in the USA with more installed firetube boilers in Ethanol plants than any other manufacturer. Ethanol requires the distillation of sugars into an alcohol fuel. Superior’s products are used to generate heat needed for the ethanol distillation processes, heating storage tanks as well as batch reactors. Additionally, Superior Boilers can be fitted with packaged burners which fire a variety of fuels from tallow to syngas to Hydrogen and most...

By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

By Evapco Inc. based in Westminster, MARYLAND (USA).

Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

By AMETEK Land based in Dronfield, UNITED KINGDOM.

Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

By Signal Group Ltd based in Camberley, UNITED KINGDOM.

Particle board production requires huge amounts of hot gas at high temperatures for wood chips dryers. Besides generating heat for the main press, the thermal oil heater can generating hot water, steam or electricity (ORC application). VYNCKE offers a customized energy solution, burning a wide variety of process fuels and external fuels (all types of biomass).

By VYNCKE based in Harelbeke, BELGIUM.

Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring...

By IGEMA GmbH based in Münster, GERMANY.

The power generation sector is an essential service industry that uses technologies ranging from the mature steam turbine to pioneering marine current turbines. Since privatisation in the UK in 1990, the main objective of the sector has been profitability for shareholders, although issues such as health, safety, sustainability and fuel poverty have also become increasingly important on the corporate agenda.

By Hobbs Valve based in Caerphilly, UNITED KINGDOM.