Only show results in Connecticut? Ok

steam plant Applications

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Steam Traps

    Steam traps constantly fail and need replacing. Steam traps are problematic on every plant. Delta Venturi Steam Traps remove these problems, are guaranteed for 10 years and do not leak steam, ever.

    By Delta Steam Systems based in SOUTH AFRICA.

  • Environmental technology for paolyester plants industry

    For vacuum generation during the polycondensation process specially developed glycol steam jet vacuum systems are used.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Automatic Tube Cleaning System for Power Generation

    Innovas Technologies provides condenser tube cleaning systems for on-load cleaning of surface condensers in steam or combined cycle plants. You’ll get continuously clean, efficient surface condensers and increased power generation capacity. Better yet, your organization will also save on energy and maintenance costs.

    By Innovas Technologies LLC based in Coralville, IOWA (USA).

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Solar Energy for Power Plants

    Regardless of whether a power plant runs on coal or natural gas, it has a very large environmental impact. Producing and transporting fuel also requires consuming resources and generating emissions. Stricter environmental requirements and increased energy costs are challenges for the industry. Solar energy can be used to preheat the water, the make-up water and the actual steam process. Solar collectors that concentrate the sunlight provide a lot of advantages for the purchaser. Read more about our products and...

    By Absolicon Solar Collector AB based in Härnösand, SWEDEN.

  • Cocoa shells making steam for bean processing

    Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power supply).

    By VYNCKE based in Harelbeke, BELGIUM.

  • Multiple fuels in multi media energy plants

    MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

    By VYNCKE based in Harelbeke, BELGIUM.

  • Recycling Solutions for the energy and environment industry

    A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment, ANDRITZ...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Premium

    Combustion Analyzers for Condensing Boilers & Furnaces

    Combustion efficiency is a measurement of how well any given fuel is being burned and converted into useful energy (e.g.: heat, hot water, steam). The calculations are based on 3 MAJOR Factors:

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Premium

    Solid/liquid separation for feed & biofuel technologies

    ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Premium

    Monitoring Heat Exchanger Leaks in Paper Plant

    Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was needed.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Industrial monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Hand Held Analyzer for Measuring Combustion Efficiency & Emissions from a Sugar Mill as a Cogeneration Process

    For many years, sugar mills have burned bagasse, the fibrous byproduct of the processing of sugarcane, using special boilers that produce the steam needed to help break down the sugar cane. As the cost of powering this equipment by burning fossil fuels has steadily risen, the use of biofuel cogeneration as a source of power production has become more prevalent. Many sugar mills have updated their bagasse-fired boilers and linked them to generators that produce electricity used to power the mill’s operations...

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Energy management

    With energy costs skyrocketing, companies are looking for ways to optimize energy usage and cut costs, but maintain production output. Companies now capture details of energy use, such as peak and non-peak use and type of fuel used— natural gas, steam, coal, etc. There are different programs such as Energy Star that companies are using for guidance and reporting.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you