Only show results available in Massachusetts? Ok

steam turbine system Applications

  • Premium

    Industrial power solutions for the nuclear industry

    A nuclear reactor produces and controls the release of energy from splitting the atoms of certain elements. The energy released from continuous fission of the atoms of the fuel is utilized as heat in either a gas or water to produce steam. The steam is used to drive the turbines that drive electricity generators. Both boiling water reactors (BWR) and pressurized water reactors (PWR) require secondary separation or “steam drying” as the final stage of water separation within the reactors. In addition,...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Turbine machines for power industry

    Our activities are closely interconnected with the energy industry. The precision casting foundry casts rotor and stator blades for gas turbines followed by precision grinding by the Industry Division. Furthermore, we also perform machining of shafts, complete blade attachment as well as subsequent assembly of steam and gas expansion turbines.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Industrial butterfly valve solutions for power generation sector

    The power generation sector is an essential service industry that uses technologies ranging from the mature steam turbine to pioneering marine current turbines. Since privatisation in the UK in 1990, the main objective of the sector has been profitability for shareholders, although issues such as health, safety, sustainability and fuel poverty have also become increasingly important on the corporate agenda.

    By Hobbs Valve based in Caerphilly, UNITED KINGDOM.

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Limpet Wind Energy Solutions

    We are working with major turbine OEMs, energy utilities and technical service specialists to reduce operations and maintenance costs and increase availability of wind turbines through the deployment of Limpet safety systems. Key applications for Limpet® systems include:

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Environmental technology for paolyester plants industry

    For vacuum generation during the polycondensation process specially developed glycol steam jet vacuum systems are used.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Multiple fuels in multi media energy plants

    MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

    By VYNCKE based in Harelbeke, BELGIUM.

  • Measurement and control systems for the controlling the level - electronically

    Discontinuous control is used mainly in smaller steam boilers with low output since the temperature fluctuations in the boiler are fairly great as a result of irregular refilling with water. Continuous control, on the other hand, permits still more economical steam generation with high quality.

    By IGEMA GmbH based in Münster, GERMANY.

  • Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. based in Westminster, MARYLAND (USA).

  • LIMPET Offshore Personnel Transfer System

    Limpet Technology is embarking on the development of a new access solution that focuses on allowing technicians and loads to transfer between vessels and offshore wind turbines more safely and in higher sea states. The overarching technical objective is to deliver a solution that can be proven to deliver safe and reliable access to and from offshore wind turbines in sea states up to and beyond 2.5 metres Significant Height (Hs).

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Measurement and control systems for the heat & steam technology

    Reduction of perating costs: The increased energy costs over the last years have made investments towards heat recovery solutions not only cost effective but profitable. With the support and input of our employees and our technical know how, are improvements and solutions concerning heat recovery become feasible.

    By IGEMA GmbH based in Münster, GERMANY.

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • Cocoa shells making steam for bean processing

    Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power supply).

    By VYNCKE based in Harelbeke, BELGIUM.

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Measurement and control systems for the Indicating the level - mechanically

    Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring...

    By IGEMA GmbH based in Münster, GERMANY.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines....

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Energy efficiency and emission reduction solutions for hospitals industry

    We help hospitals save money by reducing their fuel bills while also lowering their greenhouse gas emissions. Our proven solutions can increase the efficiency of your heating and steam system to as much as 95% with typical project paybacks (for our combined technologies) within three to five years.

    By Thermal Energy International Inc. based in Ottawa, ONTARIO (CANADA).

  • Automatic Tube Cleaning System for Power Generation

    Innovas Technologies provides condenser tube cleaning systems for on-load cleaning of surface condensers in steam or combined cycle plants. You’ll get continuously clean, efficient surface condensers and increased power generation capacity. Better yet, your organization will also save on energy and maintenance costs.

    By Innovas Technologies LLC based in Coralville, IOWA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you