Only show results in USA? Ok

wind energy grid Applications

  • Wind power solutions for the microgrids sector

    Microgrids state-of-the-art wind power with integrated storage and full controllability for the smartest of grids.

    By XANT NV based in Brussels, BELGIUM.

  • Wind power solutions for the off-grid systems sector

    Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

    By XANT NV based in Brussels, BELGIUM.

  • Hydrogen solutions for power-to-gas sector

    In 2012, GP JOULE developed the power gap filler system to compensate for load fluctuations in the grid resulting from variations in the supply of wind and solar energy. PEM electrolysers convert excess green energy into hydrogen, which can be stored and fed back into the grid as required via a biogas-fired block-type thermal power station. This makes it possible to optimally integrate renewable energies into the electrical grid and offset and compensate for a lack of energy on days when there is little wind or...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • On-demand renewable energy to assist solar/ wind microgrids

    Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Feed-in tariffs while avoiding low price periods

    Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Wind monitoring for the wind energy industry

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Wind monitoring for the offshore wind energy

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Bristol Industrial & Research Associates Ltd (BIRAL) based in Portishead, UNITED KINGDOM.

  • Industrial and Commercial Solar

    Many businesses today are faced with rising energy costs and declining competitiveness. These are some of the reasons why companies are adopting the sustainable and affordable solution of producing their own renewable energy, selling the surplus electricity back to the grid. In Turkey, businesses can install renewable energy systems with a capacity of up to 1 MW without a license, or can apply for a government license to install systems with capacities above 1 MW. Both licensed and unlicensed projects, located...

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines....

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Premium

    Restricting Birds and Wildlife -

    Prevent birds and wildlife from entering dangerous areas, as well as preventing mess and liabilities from animal mess. Bird-X products reduce and eliminate birds and wildlife from entering unwanted or dangerous areas for the good of all parties involved. Birds and animals are not harmed by Bird-X products - which are designed to make areas uncomfortable and unwelcoming to animals, forcing them to go elsewhere. Bird-X products have been developed since 1964, hold an excellent BBB rating, and we offer GSA Advantage....

    By Bird-X Inc. based in Chicago, ILLINOIS (USA).

  • Glass Fabrics for Wind Energy

    STEKLONiT offers solutions for wind energy, one of the most promising sectors of electric-power industry. Thanks to inherent high quality, physical-mechanical properties, light weight, STEKLONiT’s glass fabrics are used in manufacture blades and tubes of wind power generators. Products can be manufactured according to a customer`s requirements and delivered to any place in the world.

    By Steklonit JSC based in Moscow, RUSSIA.

  • Limpet Wind Energy Solutions

    We are working with major turbine OEMs, energy utilities and technical service specialists to reduce operations and maintenance costs and increase availability of wind turbines through the deployment of Limpet safety systems. Key applications for Limpet® systems include:

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • Hydrogen solutions for integrated grid sector

    Seamless Coordination: Comprising five H-TEC SYSTEMS electrolysis systems each with 200 kW, the hydrogen integrated grid will be installed at suitable wind farms in North Frisia. Excess electricity generated through renewable energy will be converted into hydrogen using PEM electrolysis, then stored locally in pressure tanks and regularly collected at the five locations and delivered to two hydrogen filling stations using a pressure tank vehicle. These hydrogen filling stations supply fuel cell-powered buses used...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • Environmental solutions for the wind energy industry

    Presto delivers economical and low maintenance options for stable gravel roads and staging areas with the GEOWEB and GEOTERRA load support systems. GEOWEB-confined gravel roads and pads are stronger and more stable using 50% less gravel or sand, and allow access across soft ground and low-lying areas. GEOTERRA construction mats support heavy loading without aggregate infill, yet require no specialized equipment. They are fast to deploy and safe to install for temporary access—and easy to remove after use...

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you