Only show results in Connecticut? Ok

wind energy system Applications

  • Premium

    Meteorological sensors for solar monitoring industry

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Wind power solutions for the off-grid systems sector

    Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

    By XANT NV based in Brussels, BELGIUM.

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • Engineering services for wind energy industry

    We offer expertise in the wind industry with experience at all scales of wind energy from micro turbines to offshore systems. As active members of the industry, we are represented on RenewableUK Standards Groups, IEC technical working groups and MCS working groups, developing standards and certification requirements for the industry.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Limpet Wind Energy Solutions

    We are working with major turbine OEMs, energy utilities and technical service specialists to reduce operations and maintenance costs and increase availability of wind turbines through the deployment of Limpet safety systems. Key applications for Limpet® systems include:

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Premium

    Environmental solutions for the energy storage industry

    Energy Storage solutions for lithium-ion battery electrode manufacturing.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Braking systems solutions for the renewable energy sector

    Braking systems solutions for the renewable energy sector.

    By Hilliard Corporation based in Elmira, NEW YORK (USA).

  • Plate and Angle Roll and Automatic Rolling Systems for Wind Power

    DAVI 4 roll along with our exclusive “High Productivity Package” is the most widely purchased system by top wind tower manufacturers to produce their wind tower cylinders and cones, in semi-automatic mode, in as short as 10-15 minutes only, with one only operator.

    By DAVI - Promau Group based in Cesena, ITALY.

  • Data loggers and data acquisition monitoring solutions for the alternative energy sector

    Best selection of alternative energy data loggers. Industrial, portable, remote, waterproof models with mixed-inputs and multi-channels. From simple applications up to monitoring large commercial PV arrays. Rental available. Alternative energy data loggers are suitable all applications. Simple data loggers that can be used to monitor wind speed for site surveys to complete systems that are used to monitor large commercial PV arrays are available.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Bristol Industrial & Research Associates Ltd (BIRAL) based in Portishead, UNITED KINGDOM.

  • Premium

    Environmental solutions for the process energy optimization & heat recovery

    Dürr MEGTEC’s industry-leading experience in air handling, drying, heating, cooling, process and combustion control can help improve the operating efficiency of your facility and maximize the performance of your equipment. By analyzing current process energy usage, we can offer solutions to reduce your energy consumption.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • LIMPET Offshore Personnel Transfer System

    Limpet Technology is embarking on the development of a new access solution that focuses on allowing technicians and loads to transfer between vessels and offshore wind turbines more safely and in higher sea states. The overarching technical objective is to deliver a solution that can be proven to deliver safe and reliable access to and from offshore wind turbines in sea states up to and beyond 2.5 metres Significant Height (Hs).

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines....

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Premium

    Restricting Birds and Wildlife -

    Prevent birds and wildlife from entering dangerous areas, as well as preventing mess and liabilities from animal mess. Bird-X products reduce and eliminate birds and wildlife from entering unwanted or dangerous areas for the good of all parties involved. Birds and animals are not harmed by Bird-X products - which are designed to make areas uncomfortable and unwelcoming to animals, forcing them to go elsewhere. Bird-X products have been developed since 1964, hold an excellent BBB rating, and we offer GSA Advantage....

    By Bird-X Inc. based in Chicago, ILLINOIS (USA).

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Premium

    Solid/liquid separation for feed & biofuel technologies

    ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you