Only show results available in Connecticut? Ok

wind power Applications

  • Photovoltaic power solutions for the wind power case sector

    Photovoltaic power solutions for the wind power case sector.

    By Anhui Leiton Electric Technology Co., Ltd. based in Hefei, CHINA.

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Wind power solutions for the microgrids sector

    Microgrids state-of-the-art wind power with integrated storage and full controllability for the smartest of grids.

    By XANT NV based in Brussels, BELGIUM.

  • Glass Fabrics for Wind Energy

    STEKLONiT offers solutions for wind energy, one of the most promising sectors of electric-power industry. Thanks to inherent high quality, physical-mechanical properties, light weight, STEKLONiT’s glass fabrics are used in manufacture blades and tubes of wind power generators. Products can be manufactured according to a customer`s requirements and delivered to any place in the world.

    By Steklonit JSC based in Moscow, RUSSIA.

  • Wind power solutions for the off-grid systems sector

    Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

    By XANT NV based in Brussels, BELGIUM.

  • Fabrication solutions for the wind energy industry

    Modern wind turbines include a variety of components from BRÜCK. Our products are found in the power transmission in the form of bearings, flanges, gear and generator parts as well as in the pitch and gondola housing. Due to our vast depth in manufacturing and the enormous production capacity, we can cover the usual in the wind power industry requirements and high demands in the situation. Many global players in the wind energy sector benefit from BRÜCK proposed solutions for structural design of...

    By BRÜCK GmbH based in Saarbrücken-Ensheim, GERMANY.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines....

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Wind power solutions for the agriculture industry

    Agriculture harvesting free resources to lower your electricity bill.

    By XANT NV based in Brussels, BELGIUM.

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Plate and Angle Roll and Automatic Rolling Systems for Wind Power

    DAVI 4 roll along with our exclusive “High Productivity Package” is the most widely purchased system by top wind tower manufacturers to produce their wind tower cylinders and cones, in semi-automatic mode, in as short as 10-15 minutes only, with one only operator.

    By DAVI - Promau Group based in Cesena, ITALY.

  • Hydrogen solutions for power-to-gas sector

    In 2012, GP JOULE developed the power gap filler system to compensate for load fluctuations in the grid resulting from variations in the supply of wind and solar energy. PEM electrolysers convert excess green energy into hydrogen, which can be stored and fed back into the grid as required via a biogas-fired block-type thermal power station. This makes it possible to optimally integrate renewable energies into the electrical grid and offset and compensate for a lack of energy on days when there is little wind or...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • On-demand renewable energy to assist solar/ wind microgrids

    Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Feed-in tariffs while avoiding low price periods

    Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Utility-Scale Power Plants

    As is the case in many countries, utility-scale power plants that produce renewable energy at the megawatt level are eligible to receive the Turkish government’s support via financial incentives. These power plants, whose operating costs are much lower than those of conventional power plants, can sell renewable power to electricity distribution companies at a government-guaranteed price over a fixed period of time. Companies or individuals can invest in and develop both licensed and unlicensed renewable energy...

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • Industrial and Commercial Solar

    Many businesses today are faced with rising energy costs and declining competitiveness. These are some of the reasons why companies are adopting the sustainable and affordable solution of producing their own renewable energy, selling the surplus electricity back to the grid. In Turkey, businesses can install renewable energy systems with a capacity of up to 1 MW without a license, or can apply for a government license to install systems with capacities above 1 MW. Both licensed and unlicensed projects, located...

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to...

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Hydrogen solutions for integrated grid sector

    Seamless Coordination: Comprising five H-TEC SYSTEMS electrolysis systems each with 200 kW, the hydrogen integrated grid will be installed at suitable wind farms in North Frisia. Excess electricity generated through renewable energy will be converted into hydrogen using PEM electrolysis, then stored locally in pressure tanks and regularly collected at the five locations and delivered to two hydrogen filling stations using a pressure tank vehicle. These hydrogen filling stations supply fuel cell-powered buses used...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • Adhesive technology solution for renewable energies industry

    The debate around the phase-out of nuclear power has highlighted it once again: there`s no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or...

    By Lohmann GmbH & Co.KG based in Hebron, KENTUCKY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you