Only show results in Connecticut? Ok

wind solar system Applications

  • Premium

    Meteorological sensors for solar monitoring industry

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Hydrogen solutions for power-to-gas sector

    In 2012, GP JOULE developed the power gap filler system to compensate for load fluctuations in the grid resulting from variations in the supply of wind and solar energy. PEM electrolysers convert excess green energy into hydrogen, which can be stored and fed back into the grid as required via a biogas-fired block-type thermal power station. This makes it possible to optimally integrate renewable energies into the electrical grid and offset and compensate for a lack of energy on days when there is little wind or...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • Adhesive technology solution for renewable energies industry

    The debate around the phase-out of nuclear power has highlighted it once again: there`s no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or...

    By Lohmann GmbH & Co.KG based in Hebron, KENTUCKY (USA).

  • Industrial and Commercial Solar

    Many businesses today are faced with rising energy costs and declining competitiveness. These are some of the reasons why companies are adopting the sustainable and affordable solution of producing their own renewable energy, selling the surplus electricity back to the grid. In Turkey, businesses can install renewable energy systems with a capacity of up to 1 MW without a license, or can apply for a government license to install systems with capacities above 1 MW. Both licensed and unlicensed projects, located...

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • On-demand renewable energy to assist solar/ wind microgrids

    Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Energy from waste wood

    If waste wood is utilized, woody biomass can be a form of renewable energy that complements solar and wind. Furthermore, gasifying the wood to produce electricity is a lot cleaner than disposing via controlled burns, and has a lower carbon footprint than decomposition, since decomposition often produces methane, and reverts all of the carbon to carbon dioxide, whereas with gasification, a portion is sequestered as char-ash.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Feed-in tariffs while avoiding low price periods

    Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Utility-Scale Power Plants

    As is the case in many countries, utility-scale power plants that produce renewable energy at the megawatt level are eligible to receive the Turkish government’s support via financial incentives. These power plants, whose operating costs are much lower than those of conventional power plants, can sell renewable power to electricity distribution companies at a government-guaranteed price over a fixed period of time. Companies or individuals can invest in and develop both licensed and unlicensed renewable energy...

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Solar Thermal System Control

    By SchulerControl GmbH based in Titisee-Neustadt, GERMANY.

  • Wind power solutions for the off-grid systems sector

    Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

    By XANT NV based in Brussels, BELGIUM.

  • Solar energy

    The solar system is integrating li-ion battery with solar charger,inverter and BMS,ideal for residential appliances.

    By SHENZHEN POWEROAK NEWENER CO.,LTD based in Huizhou City, Guangdong , CHINA.

  • split solar water system for Water villa(japanese customer in su zhou )

    160 split systems for japanese custom in suzhou,used in Private Villa

    By Sinoyin Solares Co Ltd based in Suzhou, CHINA.

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • Engineering services for wind energy industry

    We offer expertise in the wind industry with experience at all scales of wind energy from micro turbines to offshore systems. As active members of the industry, we are represented on RenewableUK Standards Groups, IEC technical working groups and MCS working groups, developing standards and certification requirements for the industry.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Limpet Wind Energy Solutions

    We are working with major turbine OEMs, energy utilities and technical service specialists to reduce operations and maintenance costs and increase availability of wind turbines through the deployment of Limpet safety systems. Key applications for Limpet® systems include:

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Lifepo4 battery Application

    We are the professional manufacturer of lithium&lifepo4 battery packs&solar energy storage systems . our battery products cover ebike,e-scooter,marine ship, electric boat,golf cart, RV, PV, electrional equipments,outdoor & solar street lighting,solar ener

  • Plate and Angle Roll and Automatic Rolling Systems for Wind Power

    DAVI 4 roll along with our exclusive “High Productivity Package” is the most widely purchased system by top wind tower manufacturers to produce their wind tower cylinders and cones, in semi-automatic mode, in as short as 10-15 minutes only, with one only operator.

    By DAVI - Promau Group based in Cesena, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you