Only show results in Texas? Ok

wood power plant Applications

  • Wood Cogeneration for Rural Communities

    Small rural communities or work camps are ideal applications for the Borealis wood power plant. Its application fit is best when the heat can be used to support a micro-heating-network for 25 homes or fewer in conjunction with a community centre as base load. Power needs must exceed the 45 kWh or it can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Wood Cogeneration for Industry

    Any company that has a need for both heat and power is an ideal fit for the Borealis wood power system, especially if located in a rural setting where energy costs are high. The application requirement must be for the full 45 kWh of power for immediate use. If power requirement is not that high, then this energy can be sold to the regional power grid often at preferred rates. Options for off-grid solutions are being reviewed.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Premium

    Flow & energy management solutions for power & thermal plant sector

    Spire Metering is a great fit for Power Plant, Thermal Energy Production Plants.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Solutions for power generation infrastructure sector

    As the owner-operator of power generation facilities, your plants and supporting infrastructure are critical to your success. Our solutions span the entire asset lifecycle from design through construction and into operations. Coordinate capital projects and revamps, whether managed directly or through contractors, with solutions for multi-discipline design and analysis and project collaboration. You will bring new plants into production more quickly and manage revamps with confidence.

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

  • Wood Cogeneration for Farms

    Farming operations that require heat also benefit from the CHP system. The return on investment will vary dependent on whether there is low or no cost access to wood chips and whether the 45 kWh of power can be fully utilized on site or, if not, what rate the power can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Premium

    Industrial power solutions for the coal-fired sector

    Without controls, the combustion of solid fuel (coal) to generate power results in the emission of carbon dioxide (CO2), sulfur dioxides (SO2), nitrogen oxides (NOx), particulate matter, mercury, lead, cadmium, carbon monoxide, volatile organic compounds (VOCs), and arsenic. This is why it is critically important for solid fuel power plants to comply with stringent environmental standards by utilizing the optimal technologies for emissions management, environmental air pollution control, and fluid handling and...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Air emissions solutions for boilers and burners sector

    Measurement Technique for Combustion Applications. Gas burners, Fuel burners, Low NOx burners, FLOX burners, Large-sized combustion plants, Large-sized boilers, Industrial ovens, Biomass firing plants, Wood-firing combustion plants.

    By Online Safety Services (Europe) Ltd based in Staffordshire, UNITED KINGDOM.

  • Premium

    Control corrosion for power plants

    By InduMar Products, Inc. based in Houston, TEXAS (USA).

  • Premium

    Dosimetry Management Solutions for Dosimetry in the Nuclear Industry

    Dosimetry management aims to supervise the radiation dose received by workers in controlled areas in nuclear power plants and also in all types of industries exposed to radioactivity.

    By Bertin Instruments SAS based in Montigny-le-Bretonneux, FRANCE.

  • Process design & engineering services for power sector

    Each Power Plant is unique in its own way based on feed material, capacity and power output. Proxion Process provides services that are carefully tailored to meet a plant specification and requirement. From expert consultant services to technology to comprehensive project management, field service and technical support, Proxion Process offer comprehensive safe, reliable and cost-effective solution. Our aim is to improve plant availability, productivity and competitiveness.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Solar Energy for Power Plants

    Regardless of whether a power plant runs on coal or natural gas, it has a very large environmental impact. Producing and transporting fuel also requires consuming resources and generating emissions. Stricter environmental requirements and increased energy costs are challenges for the industry. Solar energy can be used to preheat the water, the make-up water and the actual steam process. Solar collectors that concentrate the sunlight provide a lot of advantages for the purchaser. Read more about our products and...

    By Absolicon Solar Collector AB based in Härnösand, SWEDEN.

  • Power Plant & Power Station Emissions Monitoring

    For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Renewable energy solutions for the saving energy industry

    Frequency inverter reconstruction of Power Plant promoted heightening of economy benefit. Frequency inverter won acceptance of user as its high reliability, flexible adjustment and simple operation. A Power Plant was set up in June, 2000. Its predecessor was one of key plants of state. The plant put into service in 1957. Now it has 4×50MW, 2×142MW, total ten boilers and six generators. Total capacity is 484MW. The plant supplies power to big enterprise near to it.

    By Shenzhen Veikong Electric Co.,Ltd based in Shenzhen, CHINA.

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Utility-Scale Power Plants

    As is the case in many countries, utility-scale power plants that produce renewable energy at the megawatt level are eligible to receive the Turkish government’s support via financial incentives. These power plants, whose operating costs are much lower than those of conventional power plants, can sell renewable power to electricity distribution companies at a government-guaranteed price over a fixed period of time. Companies or individuals can invest in and develop both licensed and unlicensed renewable energy...

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you