Applications in Europe

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. Office in Ilkley, UNITED KINGDOM.

  • Premium

    Industrial gas detection solutions for wind turbines / power generation industry

    DOD Technologies provides products in various applications that utilize, manufacture, or expel toxic, corrosive, and combustible gases. However, we also provide solutions outside of gas detection. Wind turbines utilize large blades propelled by the wind to generate renewable energy. One major challenge with wind is that it doesn’t come from the same direction every day. Therefore, wind turbines are fixed to rotating head that can optimize the collection of wind energy. This rotating head utilizes bearings...

    By DOD Technologies Inc Distributor in Birkenhead, UNITED KINGDOM.

  • Premium

    Industrial solutions for coal ash pond remediation applications

    Bottom Ash Pond Replacement: When coal is burned, two major forms of ash are produced. The fly ash is light and leaves the furnace with hot gases. The bottom ash is heavy and stays in the furnace until it is scraped out. Due to potential liability issues and/or the need to find new real estate at power plants for expansion, many utilities must replace their traditional coal ash ponds. Utilities using traditional hydro bins can accomplish this by installing a system using solids contact clarifiers and dewatering...

    By WesTech Engineering, Inc. Office in Pioltello, ITALY.

  • Premium

    UV fluorescence technology for monitoring of leaks in heat exchangers

    Optical instruments called fluorometers can very easily detect and measure dissolved petroleum hydrocarbons in water, and at very low concentrations. As shown in the study below, TD-4100 series monitors are able to measure xylene continuously over four consecutive weeks with a direct correlation coefficient of 0.9967 compared to GC grab sample analysis.

    By Turner Designs Hydrocarbon Instruments, Inc. Distributor in SLOVAKIA.

  • Premium

    Braking systems solutions for the renewable energy sector

    Braking systems solutions for the renewable energy sector.

    By Hilliard Corporation Office in Duesseldorf, GERMANY.

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline Distributor in Co. Wicklo, IRELAND.

  • Premium

    VOC abatement equipments for power generation & distribution

    Create more efficient power production.

    By Munters Office in Almelo, NETHERLANDS.

  • Premium

    Industrial power solutions for the natural gas sector

    Cleaner burning than other fossil fuels, the combustion of natural gas produces negligible amounts of sulfur, mercury, and particulates. However, natural gas does produce nitrogen oxides (NOx), which contributes to smog.

    By CECO Environmental Office in Nunspeet, NETHERLANDS.

  • Premium

    Portable and fixed gas analysers for biogas upgrading

    Biogas with 60% CH4 can be upgraded using various techniques. Upgraded biogas may be packaged for transport use, injected into a distribution network or piped off site.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Industrial power solutions for the coal-fired sector

    Without controls, the combustion of solid fuel (coal) to generate power results in the emission of carbon dioxide (CO2), sulfur dioxides (SO2), nitrogen oxides (NOx), particulate matter, mercury, lead, cadmium, carbon monoxide, volatile organic compounds (VOCs), and arsenic. This is why it is critically important for solid fuel power plants to comply with stringent environmental standards by utilizing the optimal technologies for emissions management, environmental air pollution control, and fluid handling and...

    By CECO Environmental Office in Nunspeet, NETHERLANDS.

  • Premium

    High-tech energy solution for the solar panel manufacturing industry

    The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun`s energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas...

    By CECO Environmental Office in Nunspeet, NETHERLANDS.

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and...

    By AMETEK MOCON - Baseline Distributor in Co. Wicklo, IRELAND.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Motion control solutions for the power generation sector

    Motion control solutions for the power generation.

    By Hilliard Corporation Office in Duesseldorf, GERMANY.

  • Premium

    Flow measurement instrumentation for geothermal flow solutions

    The "dirty" steam produced from geothermal ground steam has always been a difficult measurement. Our unique mass vortex meters are designed for this tough application allowing steam readings in pipes up to 72" (2M).

    By Sierra Instruments, Inc. Office in Egmond aan den Hoef, NETHERLANDS.

  • Premium

    Drive train solutions for the outdoor power equipment sector

    Drive train solutions for the outdoor power equipment sector.

    By Hilliard Corporation Office in Duesseldorf, GERMANY.

  • Premium

    UV fluorescence technology for monitoring of fuels in stormwater

    A major pipeline company has large storage tank farms throughout the Western States. The pipeline company transports, stores, blends additives, and distributes gasoline, diesel, and jet fuel to retail service stations and airports. Due to the quantity and movement of fuel at these facilities, there is always the potential for fuel spills. These facilities prevent out of compliance discharge by capturing all stormwater in storm drains, which is then sent to treatment systems prior to discharge. At some sites,...

    By Turner Designs Hydrocarbon Instruments, Inc. Distributor in SLOVAKIA.

  • Premium

    UV fluorescence technology for monitoring heat exchanger leaks in paper plant

    Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was needed.

    By Turner Designs Hydrocarbon Instruments, Inc. Distributor in SLOVAKIA.

  • Premium

    Industrial monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you